Manual Husqvarna ST 430T (page 23 of 200) (English, German, Dutch, French, Italian, Spanish)

734469

Zoom out

Zoom in

1/200

To remove the auger belt (for ST 424T/427T/

430T only)

1. Remove the 5/16'' nut and the cable cover (E) from

the frame.

2. Remove the top 5/16'' bolts from the 2 sides of the

frame. Do not discard the bolts.

3. Remove the lower 5/16'' bolts (C) on the 2 sides of

the frame.

4. Remove the auger belt (B) from the engine pulley

(A).

5. Use the adjustment lever for the auger bucket to tilt

the rear section down. The front section tilts forward

at the same time. The bottom bolt is a hinge

between the front and rear sections.

6. Put a wooden block below the hinge point to set the

product in the tilted position.

7. Move the auger brake arm and remove the auger

belt (B) from around the auger brake arm.

To install the auger belt

1. Move the auger brake arm (G). Put the auger belt

around and in the groove of the auger pulley (E).

CAUTION: Make sure that the belt is not

caught between the frame and auger

housing as you put the unit together.

2. Remove the wooden block from below the product.

3. Lift the handles to tilt the rear section up. The front

section tilts back and pivots to attach to the rear

section.

4. Make sure that the belt is put in the auger pulley (E)

groove correctly.

5. Install the 5/16'' bolts (C), and tighten (11-16 Nm).

6. For ST 424/427/430 only: Install the ¼'' bolts (D) and

tighten (5-8 Nm).

7. Install the auger belt (B) on the engine pulley (A).

Make sure that the belt is put correctly around the

idler pulley and installed correctly in the engine

pulley groove.

8. Install the cable cover (F) and the 5/16" nut on the

frame.

9. Operate all controls to make sure that the auger belt

is installed correctly and that all components are

moving correctly.

To adjust the auger belt tension

Note: An assistant is necessary to do this task.

1. Remove the belt cover. See

To prepare for

replacement of the belts on page 21

891 - 005 - 08.01.2020 23

PRI ZARAZENÍ ZPETNÉHO POJEZDU STROJ CUKÁ A NEJEDE KLIDNE Submitted on 16-1-2021 at 14:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 430T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 430T Manual

Product: