Manual Husqvarna ST 430T (page 24 of 200) (English, German, Dutch, French, Italian, Spanish)

734469

Zoom out

Zoom in

1/200

2. Loosen the idler pulley nut (A).

3. Move the idler pulley (B) in the direction of the auger

belt to increase the belt tension. Move it away from

the auger belt to decrease the belt tension.

4. Tighten the idler pulley nut (A).

5. Have the assistant stay 3 m (10 feet) in front of the

product to monitor the movement of the auger.

6. Push and then release the auger engagement to

start and stop the auger.

7. Measure the time for the auger to stop moving. If the

auger stops after more than 5 seconds, release the

belt tension.

8. When the auger stops moving after less than 5

seconds, install the belt cover. See

To install the belt

cover on page 22

To adjust the auger control cable

1. Remove the cable cover on the right hand side of the

frame (D).

2. To remove slack from the auger control cable,

unscrew the bottom jam nut (B) and tighten the top

jam nut (B) until the auger belt tension has

increased.

3. Retest the auger engagement. Repeat adjustment

as needed until only a small amount of slack remains

in the cable when the lever is disengaged.

4. Tighten the bottom jam nut to lock in the tension.

Note: You may also tension the auger belt by

adjusting the idler pulley as a secondary option. If

the adjustment does not resolve the problem,

replace the auger belt. See

To install the auger belt

on page 23

To adjust the release cable of the

discharge chute

1. To adjust the release cable, turn the cable adjuster

until the release lever of the discharge chute does

not move freely.

To adjust the left and right discharge

chute cables

1. Put the discharge chute lever in the center position.

24 891 - 005 - 08.01.2020

PRI ZARAZENÍ ZPETNÉHO POJEZDU STROJ CUKÁ A NEJEDE KLIDNE Submitted on 16-1-2021 at 14:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 430T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 430T Manual

Product: