595368
29
Zoom out
Zoom in
Previous page
1/48
Next page
English – 29
MAINTENANCE AND SERVICE
5 Lower the cutting unit to the lowest position. The cutting
unit now hangs free at the back.
6 Remove the universal drive shaft completely. Lift off the
lock chains.
7 Disconnect the hydraulic hoses from the quick
connections on the machine.
(Combi 132 X, Combi 155 X)
8 Remove the service strut from the cutting unit.
If it is the first time the service strut is removed, remove
the safety strap from the strut and place it in the storage
compartment under the seat.
9 Fit the service strut to the attachment under the base
plate. The attachment is highlighted in red.
10 Fit the other end of the strut to the attachment on the
cutting unit. Remove the pin and slide the strut across the
shaft which is marked red.
11 Release the pin so that it locks over the shaft.
12 Start the engine and raise the cutting unit to the service
position.
13 Secure the cutting unit with the safety belt, which is stored
in the storage compartment under the seat.
Restoring from service position
1 Remove the safety belt and place it in the storage
compartment.
2 Lower the cutting unit to the lowest position.
3 Remove the service strut and place it on the cutting unit.
4 Fit the universal drive shaft to the cutting unit. Secure the
front locking chain to the universal joint cover around the
cross pipe.
5 Start the engine. Raise the cutting unit halfway.
6 Fit the lifting eyes which are attached to the lift arms. Pull
out the catch and press in the lifting eye. There is one for
each lift arm.
7 Lower the cutting unit.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 520D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 520D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 520D - 2015

Husqvarna P 520D - 2015 User Manual - German - 48 pages

Husqvarna P 520D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info