595368
31
Zoom out
Zoom in
Previous page
1/48
Next page
English – 31
MAINTENANCE AND SERVICE
Cutting height - Combi 132 X, Combi 155 X
1 Position the machine on flat ground. Apply the parking
brake.
2 Adjust the cutting unit to the lowest cutting height and
lower the cutting unit.
3 Adjust the cutting height by depressing the button on the
adjustment bar and moving the bar forwards or
backwards. The height adjustment is variable.
4 The selected cutting height is indicated on the cutting
deck.
The adjustment bar raise and lower function depends on the
location of the hydraulic hoses in the quick couplings on the
machine.
Test adjustment bar function by depressing the button on
the bar and moving it backwards and forwards.
Switch the raise and lowering function by changing the
location of the hydraulic hoses.
Tilt angle - Combi 132 X, Combi 155 X
Place the machine on a flat surface.
Check the air pressure in the tyres The tyre pressure
should be 1.5 bar/150 kPa/22 PSI for all wheels
Measure the distance from the front and back edge on
both sides of the deck to the ground.
The rear edge of the cutting unit should be 6-9 mm (1/4"-
3/8") higher than the front of the unit.
If necessary, loosen the lock nut and turn the adjustment
screw on both sides of the cutting deck. Extend the stay in
order to raise the front edge of the cutting deck.
Tighten the lock nut against the ball joint.
!
WARNING! Keep unauthorised persons at a
distance. You are responsible to ensure that
animals and onlookers are not within the
working area.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 520D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 520D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 520D - 2015

Husqvarna P 520D - 2015 User Manual - German - 48 pages

Husqvarna P 520D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info