595368
21
Zoom out
Zoom in
Previous page
1/48
Next page
English – 21
OPERATING
Driving on slopes
Driving on slopes is one of the operations where the risk of
the driver losing control of the machine or of it overturning is
the greatest; this can result in serious injury or death. All
slopes demand extra care. If you cannot reverse up a slope or
if you feel unsure, do not mow it.
This is what you do
Remove obstacles such as stones, branches, etc.
Mow upwards and downwards, not sideways.
Do not use the machine on ground that slopes more than
10°.
Take extra care if any attachments are fitted that can
change the stability of the machine.
Avoid starting or stopping on a slope. If the tyres start to
slip, stop the blades and drive slowly down the slope.
Always drive smoothly and slowly on slopes.
Always use ROPS (Rollover Protective Structure) and
seat belts when riding on slopes.
Do not make any sudden changes in speed or direction.
Avoid unnecessary turns on slopes, if necessary, turn
slowly and gradually downwards if possible. Drive slowly.
Do not turn the wheel sharply.
Watch out for and avoid driving over furrows, holes and
bumps. It is easier for the machine to overturn on uneven
ground. Tall grass can hide obstacles.
Do not mow too close to edges, ditches or banks. The
machine can suddenly overturn if one wheel comes over
the edge of a steep slope or a ditch, or if an edge gives
way.
Do not mow wet grass. It is slippery, and tyres can lose
their grip so that the machine skids.
Do not try to stabilize the machine by putting your foot on
the ground.
When cleaning the chassis, the machine may never be
driven near verges or ditches.
When mowing, keep away from bushes and other objects.
Follow the manufacturer’s recommendations regarding
wheel weights or counterbalance weights to increase
machine stability.
Lights and power outlet
The lights are switched on and off using the switch on the
instrument panel.
A seat heater or mobile phone charger are examples of
articles that can be connected to the power socket.
The power outlet is switched on and off using power switch on
the control panel.
The power outlet works even if the ignition is turned off. Do
not forget to disconnect the power outlet or remove the power
consumer when the machine is not in use.
The voltage is 12 V.
IMPORTANT! Do not drive down slopes with the cutting
deck raised.
IMPORTANT! Some combinations of accessories require
additional counterweight at the rear Check with your dealer
for the right combination.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 520D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 520D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 520D - 2015

Husqvarna P 520D - 2015 User Manual - German - 48 pages

Husqvarna P 520D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info