595368
19
Zoom out
Zoom in
Previous page
1/48
Next page
English – 19
OPERATING
Work safety
Make sure nobody else is in the vicinity of the machine
when you start the engine, engage the drive or drive off.
Clear the area of objects such as stones, toys, wires, etc.
that may become caught in the blades and be thrown out.
Look out for the ejector and do not direct it towards
anyone.
Always look downwards and backwards before and while
reversing. Keep watch for both large and small obstacles.
Slow before cornering.
Switch off the blades when you are not mowing.
Take care when rounding a fixed object, so that the blades
do not hit it. Never run the machine over foreign objects.
Only use the machine in daylight or in other well-lit
conditions. Keep the machine at a safe distance from
holes or other irregularities in the ground. Pay attention to
other possible risks.
Never use the machine if you are tired, if you have
consumed alcohol, if you are taking other drugs or
medication that can affect your vision, judgement or co-
ordination.
Never use the machine in bad weather, for instance in fog,
in rain, damp or in wet locations,strong winds, intense
cold, risk of lightning, etc.
Keep an eye on the traffic when working close to a road or
when crossing it.
Instrument panel
The indicator lights are on the steering console under the
steering wheel.
1 Temperature gauge for coolant *
2 Oil pressure, check oil level and top up if necessary.
3 Indicates glow plug heating
4 Charge the battery.
5 Controls for driving the cutting unit blades activated
6 The parking brake is applied.
7 Spotlight activated
* Temperature gauge for coolant. The engine is liquid cooled.
If overheating of the engine is indicated the first action to take
is to reduce the engine temperature by running the engine at
idle with no load. Turn off the power transmission Check
coolant level and top up if necessary. Also check that the
radiator grill and radiator are clean and not clogged. The grill
is at the rear of the machine and on top of the bonnet.
Driving the Rider
Release the parking brake before driving
When driving the throttle control must be in the position for
maximum engine speed, work mode.
Carefully press down one of the pedals until the required
speed is obtained. Pedal (1) is used to drive forwards, and
pedal (2) to drive backwards.
(P 525D)
The forward pedal has a catch that can be foot operated.
When the catch is in full-speed position (2), the driver can fully
depress the forward pedal. For more information, please see
'Speed Control'.
123456
7
!
WARNING! Make sure that branches do not
obstruct the pedals when mowing under
bushes.
Localise and mark stones and other fixed
objects to avoid collision.
!
WARNING! Do not use the Rider on ground
that slopes more than 10
°. Mow slopes
upwards and downwards, never across.
Avoid sudden changes in direction.
2
1
8095-306
2
3
1
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 520D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 520D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 520D - 2015

Husqvarna P 520D - 2015 User Manual - German - 48 pages

Husqvarna P 520D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info