595368
20
Zoom out
Zoom in
Previous page
1/48
Next page
20 – English
OPERATING
Adjusting the cutting height
The cutting height can be adjusted to seven different
positions.
Select the required cutting height (1-7) using the cutting
height adjusters. Set the knobs horizontally so that they do
not snag on bushes and the like. For more information, see
'Cutting Height and Tilt Angle Adjustment'.
Lever for hydraulic lift of attachments
The lifting lever is used to put the cutting unit in either the
transport or mowing position when hydraulic pressure is
available.
The lever has four different positions.
1 Neutral position or transport position
2 Lowers the cutting unit with spring return to the neutral
position
3 Floating where the lever stops. The unit is lowered to the
automatically floating position, which means that the
cutting unit follows the contours of the ground.
4 Raises the cutting unit with spring return to neutral
position.
Mowing Position
Lower the cutting unit by directly moving the lever forward
to the float position where the lever stays put. (3)
Start the drive for the blades by pulling up the drive control
for the cutting unit.
Transport position
Stop the blades by pressing in the control for driving the
cutting unit.
Pull back on the lever for the hydraulic lift to engage
transport position. The unit is then raised. (1)
(P 525D)
When a steady speed is required, the catch for the forward
pedal can be pulled back with your foot. This will hold the
forward pedal in half-speed position (1) for controlled mowing
also on uneven lawns.
For more information, please see 'Speed Control'.
Braking
Release the drive pedals. The machine slows and is
stopped by the drive system. Do not use the parking brake
as the drive brake.
Quicker braking is possible if you press down the drive
pedal for the opposite direction.
8095-306
2
3
1
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna P 520D - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna P 520D - 2015 in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna P 520D - 2015

Husqvarna P 520D - 2015 User Manual - German - 48 pages

Husqvarna P 520D - 2015 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info