Manual Husqvarna H-Class 200S (page 50 of 64) (English, French, Spanish)

517448

Zoom out

Zoom in

1/64

BASIC TECHNIQUES

TURNING OUTSIDE CORNERS WITHOUT CUTTING THREADS

1. When you reach the fabric edge, stop stitching with the needle above the fabric.

2. Raise the presser foot and gently pull on the thread chain just enough to clear the

stitch nger.

3. Turn the fabric, lower the presser foot and begin stitching in the new direction. Fig. 1.

NOTE: When overlocking and trimming at the same time, cut the fabric along the new stitching line for

about 1 ⅛" (3 cm).

1 2 3 4 5

FIG. 1

FIG. 3

FIG. 2

FIG. 4

TURNING INSIDE CORNER

1. Fold fabric to form a straight line. (1)

2. Fold the upper left corner of the folded portion down to

meet the folder edge. (2)

3. Fold the folded portion again to meet the right edge. (3)

4. Place the fabric under presser foot and sew up to 2

stitches beyond the inside corner. (4)

5. Raise the presser foot and turn the fabric. Unfold the

folded portion and sew the next edge of the fabric. (5)

TURNING CURVED EDGES

Apply pressure at point A in the direction of the arrow with your left hand, and at the

same time apply a little opposite pressure at point B with your right hand (Fig. 3)

For outside curves, place fabric under the presser foot in a similar manner, but applying

the pressure in the opposited directions. Fig. 4

Illustration

*I: Cut

HClass_200s_EN.indd 48 2010-11-19 09:20:52

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-Class 200S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna H-Class 200S Manual

Product: