517448
48
Zoom out
Zoom in
Previous page
1/64
Next page
46
SETTING DIFFERENTIAL FEED
Set by simply moving the differential feed control dial in the direction desired, referring to the
chart below. The adjustment can be made between 0.7 (negative effect) and 2 (positive effect).
These settings give the best ratio of feeding.
For normal sewing without differential feed, set the dial on 1.
The lever can be reset even while sewing.
FOOT PRESSURE REGULATOR
Presser foot pressure has been correctly set at the factory, so you do not need to adjust it for
most ordinary sewing. If adjustment is necessary, turn the foot pressure regulator to a higher
number to increase or to a lower number to decrease pressure.
SEWING WITH EXTRA HEAVYWEIGHT FABRIC OR MULTIPLE LAYERS
OF FABRIC
A wide range of fabric can be sewn on this machine. It is recommended that you tighten the
screw as illustrated when sewing with extra heavy weight fabrics or multiple layers of fabric.
Open the working table to make adjustments.
When sewing with light or normal weight fabric, loosen the screw on the cutter release
mechanism, located below the slot in the needle plate. Or turn the overedge cutting width dial
to adjust cutting width for your fabric.
The machine is set at the factory for normal weight fabric.
Illustration
*I: Differential feed control dial
*II: Increase
*III: Decrease
*IV: Tighten
*V: Loosen
*VI: Cutter release mechanism screw.
Effect and application Type of feeding Setting Feed ratio rear: front
Waver-free seams, Gathering Positive differential feed
1-2
|-----------|----------------|
No differential feed Neutral feed
1
|--------------|-------------|
Pucker-free seams Negative differential feed
0.7-1
|-----------------|----------|
HClass_200s_EN.indd 46 2010-11-19 09:20:51
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H-Class 200S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-Class 200S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info