Manual Husqvarna H-Class 200S (page 52 of 64) (English, French, Spanish)

517448

Zoom out

Zoom in

1/64

REMOVING STITCHES FROM SEWN FABRIC

To remove stitches already sewn, snip off needle thread(s) at intervals and pull out looper

thread(s).

CORDED OVERLOCK

Corded overlock can be used to strengthen shoulder, sleeve or side seams when making

knitted garments. As a decorative feature, you can use knitting yarn of contrasting colors to

further enhance your garment. Your machine is equipped with a presser foot which has been

designed to feed cord or yarn to the left or right of the stitch. Follow directions as follows:

1. Place a “ller” cord, such as a crochet cotton, gimp, wool, knitting yarn, or shirring elastic

at the rear of the machine spool pin. Pass the cord through the cord guides (1) and (2)

and then through the left needle thread guide (3). See Fig. 1.

2. Insert the cord through either the front or rear hole on the presser foot. Pass it under and

to the rear of the foot.

3. Place the fabric under the presser foot as usual. Start at a slow speed, making sure the

cord is feeding correctly. Increase speed as needed.

FOR JOINING SHOULDERS OR SLEEVES, pass the cord through the front hole in

the presser foot. Be sure the cord is between the left and right needle threads as it is guided

through the front hole. (Fig. 2)

FOR JOINING SIDE SEAMS, pass the cord through the rear hole in the presser foot. Be

sure it is positioned under the right needle thread. (Fig. 3)

FOR DECORATIVE EFFECTS, pass contrasting color cords through either the front or rear

hole in the presser foot, or pass cord through both holes.

FOR MAKING WAVY EDGES OR HEMS, (Fig. 4) pass heavy monolament thread

through the rear hole in the presser foot and use a Rolled Hem. (See page 36).

FIG. 2

FIG. 3

FIG. 4

HClass_200s_EN.indd 50 2010-11-19 09:20:53

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-Class 200S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna H-Class 200S Manual

Product: