609769
76
Zoom out
Zoom in
Previous page
1/84
Next page
Needle Thread Breaks
Did you insert the needle properly? Insert needle correctly as described, see page 23.
Did you insert a wrong needle?
Use needle system 130/705 H.
Use a needle suitable for selected fabric and thread.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Remove the thread completely and rethread the machine, see
Threading the Machine, page 16.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Are you using poor thread with slubs or thread which has
become dry?
Change to a new high quality thread purchased from an
authorized HUSQVARNA VIKING® retailer.
Is the correct spool cap used? Attach the correct spool cap for your thread spool.
Is the best spool pin position used? Try a different spool pin position (vertical or horizontal).
Is the needle plate hole damaged? Change the needle plate.
Bobbin Thread Breaks
Did you insert the bobbin properly? Check the bobbin thread.
Is the needle plate hole damaged? Change the needle plate.
Is the bobbin area full of lint? Clean lint from bobbin area and use only the bobbins
approved for this model.
Is the bobbin wound correctly? Wind a new bobbin.
The Seam Has Uneven Stitches
Is the thread tension correct? Check needle thread tension.
Remove the thread completely and rethread the machine, see
Threading the Machine, page 16.
Is the thread you are using thick or slubbed? Change the thread.
Is the bobbin thread evenly wound? Check bobbin winding.
Is a correct needle used? Insert a proper needle correctly as described, see page 23.
Use a needle suitable for selected fabric and thread.
The Machine Does Not Feed or Feeds Irregularly
Did you thread the machine properly? Remove the thread completely and rethread the machine, see
Threading the Machine, page 16.
Has lint collected between the feed teeth? Remove the needle plate and clean the feed teeth with the
brush.
Are the feed teeth lowered? Raise the feed teeth.
Unable To Sew a Buttonhole
Are you experiencing problems when using the One-Step
Buttonhole Foot?
Lower the buttonhole lever all the way down. Lower the
presser foot gently.
76 8 Maintenance
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info