609769
75
Zoom out
Zoom in
Previous page
1/84
Next page
Replacing the Needle Plate
With the feed teeth lowered, replace the needle plate and
insert and tighten the two needle plate screws.
Replace the bobbin cover.
Troubleshooting
In this troubleshooting guide you will find solutions to any
issues you may have with your machine. For further
information please contact your local authorized
HUSQVARNA VIKING® retailer who will be happy to help
you.
General Problems
Thread cutter does not cut the thread? Remove the needle plate and clean lint from bobbin area.
Enable cut auto in the SET menu.
Fabric does not feed? Make sure the feed teeth are not lowered.
Wrong stitch, irregular or narrow stitch? Deactivate twin needle or stitch width safety in the settings
menu.
The needle breaks? Insert needle correctly as described, see page 23.
Use a needle suitable for selected fabric.
The machine will not sew? Check that all plugs are securely plugged into the machine
and the wall socket.
Check that the foot control cord is securely plugged into the
front socket on the bottom right side of the machine.
Push bobbin winder spindle to sewing position.
The sewing and embroidery machine function buttons do not
respond to touch?
The sockets and function buttons on the machine can be
sensitive to static electricity. If the buttons do not respond to
touch, turn the machine OFF and then ON again. If the
problem persists, contact your local authorized
HUSQVARNA VIKING® retailer.
The Machine Skips Stitches
Did you insert the needle properly? Insert needle correctly as described, see page 23.
Did you insert a wrong needle?
Use needle system 130/705 H.
Use a needle suitable for selected fabric and thread.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Remove the thread completely and rethread the machine, see
Threading the Machine, page 16.
Is the correct presser foot used? Attach correct presser foot.
Is the needle too small for the thread? Change the needle.
8 Maintenance 75
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info