609769
74
Zoom out
Zoom in
Previous page
1/84
Next page
8 Maintenance
Cleaning the Machine
To keep your sewing machine operating well, clean it often.
No lubrication (oiling) is needed. Wipe the exterior surface of
your machine with a soft cloth to remove any dust or lint
built up. Wipe the graphic display with a clean, soft and
damp cloth.
Cleaning the Bobbin Area
Lower the feed teeth and turn off the machine.
Remove the presser foot. Push the bobbin cover release
button (A) to the right and remove the bobbin cover (B) and
the bobbin. Use the screwdriver for the needle plate to
remove the two screws (C) in the needle plate. Lift up the
needle plate. Clean the feed teeth and bobbin area with the
brush included with the accessories.
Cleaning Under the Bobbin Area
Clean the area under the bobbin case after sewing several
projects or any time you notice an accumulation of lint in the
bobbin case area. Remove the bobbin case by lifting it up.
Clean the area with the brush or a dry cloth.
Use caution when cleaning around the thread cutter knife
(B).
Put the bobbin case in place so that the tip (A) fits into the
stopper (C).
Note: Do not blow air into the bobbin case area. The dust and lint will
be blown into your machine.
Note: When using the optional accessory HUSQVARNA
VIKING® Embroidery Cutwork Needles, it is necessary to clean the
bobbin area after each embroidered design/project.
74 8 Maintenance
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info