Manual HomeMatic HmIP-WKP (page 31 of 101) (English, German, Dutch, French, Italian, Spanish)

808529

Zoom out

Zoom in

1/101

Changing the batteries

5.5 Keypad illumination

Directly above the Keypad panel

(C)

is the slightly bevelled surface of the

proximity sensor

(F).

When your hand approaches the Keypad, the inte-

grated proximity sensor reacts, and the Keypad illumination is switched

on. This means you can always make out the keypad panel of your Key-

pad even in dim outdoor lighting.

6 Changing the batteries

If the battery symbol is displayed via the app or an empty battery is in-

dicated on the device (see „7.5 Error codes and ﬂashing sequences“ on

page 33), replace the two used batteries with two new LR03/Micro/

AAA batteries. Take care to observe the correct battery polarity.

To replace the Keypad batteries, please proceed as follows:

• Remove the Keypad (B) from the wall bracket (A), by inserting a

thin object into the hole on the bottom of the wall bracket and

releasing the latch (M)

(see ﬁgure 3).

You will now receive a tamper message in your app. This can only be

acknowledged when the Keypad has been reinserted in the wall

bracket after replacing the batteries.

• Open the rear battery compartment

(J)

of the Keypad

(B)

, by loos-

ening the screw of the battery compartment cover (see ﬁgure 4).

• Remove the used batteries.

• Insert two new 1.5 V LR03/micro/batteries into the battery com-

partment, making sure that you do so with the correct polarity

(see ﬁgure 5).

• Close the battery compartment and tighten the screw on the bat-

tery compartment cover again.

• Insert the Keypad back in the wall bracket (A).

You can now acknowledge the tamper message in your app.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-WKP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HmIP-WKP Manual

Product: