808529
30
Zoom out
Zoom in
Previous page
1/101
Next page
30
Operation
If you have already paired the unit, you will receive a tamper mes-
sage within the app. You can only acknowledge this after the instal-
lation has been completed and the Keypad has been reinserted.
Position the wall bracket (A) with the bevelled surface facing up-
wards at a suitable place on the wall and mark the drill holes (see
figure 7).
Drill the pre-marked holes with a diameter of 5 mm and a depth
of 35 mm.
If you are working with a stone wall, use a 5 mm drill bit for the wall
plugs supplied. If you are working with wooden walls, you can use a
1.5 mm drill bit to make it easier to screw in the screws.
When selecting a mounting location and drilling in the vicinity of
switches or socket outlets, check for electrical wires and power
supply cables.
Mount the wall bracket using the wall plugs and screws provided
(see figure 8).
Insert the Keypad (B) back in the wall bracket (A). A latching
sound indicates whether the keypad has been inserted correctly
(see figure 8).
If you have already paired the device, you can now acknowledge the
tamper message in your app.
5.4 Operation
After you have paired the Homematic IP Keypad to the Access Point and
set it up via the app (see „5.1 Pairing“ on page 27), you can conveniently
control the access function in combination with the Homematic IP door
lock drive.
To do this, enter your PIN on the Keypad (C) and select the desired action by
pressing the “Lock” (D) or “Unlock” (E). Depending on the selected function,
the Homematic IP Door lock drive reacts and locks or unlocks the front door.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-WKP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-WKP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info