565926
14
Zoom out
Zoom in
Previous page
1/232
Next page
14
GB
How to Install the Wheel
Insert the bar tool.
Rotate the drive shaft until the hole in the large pulley and the bar tool
aligned.
Unscrew wheel mounting bolt with the 17 mm end of the box wrench or your
ngers.
Remove wheel bolt, washers and outer fl ange, leaving inner fl ange in place.
Mount wheel on arbor between the two fl anges.
Install fl at washer, lock washer and wheel bolt.
Tighten bolt securely.
WARNING
z Before tightening, check that fl anges are properly seated and not
cocked on the mount or bolt threads. Do not make bolt so tight
as to destroy the cushion supplied by the wheel blotters. Never
fasten while applying your weight. Otherwise the thread could be
broken. Do not tighten more than 20 N•m (200 kgf•cm).
z Inner and outer fl anges are not interchangeable. Reversing
positions may cause wheel damage and lock the wheel.
NOTE
Arm may be removed and remounted with wheel on the outboard side of
the arm as required for certain procedures. See page 19 for details.
Remove Wheel Bolt,
Washers and Outer
Flange
Bar Tool
Wheel Bolt
Hole the Large Pulley
Wheel with Blotters
Lock Washer
Flat Washer
Arm
Outer Flange
Inner Flange
22 mm Adapter
Cutting Wheel
Box Wrench 17×19 mm
Tighten
CM14E_WE_all.indb 14CM14E_WE_all.indb 14 2008/02/05 21:09:312008/02/05 21:09:31
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CM14E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CM14E in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info