647375
25
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 25
Change oil exhaust filter(s)
SEALING SYSTEM MAINTENANCE
All or some of the following sealing systems are possible in the BOXER/MARLIN/FALCON/POLAR series. It is essential
to know which sealing system is applicable to the relevant machine.
Servicing the sealing bar is almost identical for all systems. The seal quality is partially dependent on the maintenance of
the sealing bar and contra-bar (silicone holder). The main maintenance activities are the daily cleaning of the sealing bar
and the silicone holder with a damp cloth and a weekly inspection of the bars with replacement of the sealing wire, teflon
tape or silicone rubber if irregularities appear on top of the bar or the seal quality is insufficient.
The average maintenance cycle of the sealing bar (teflon tape / sealing wire) is at least once every 3 months.
(This indication refers to regular use of the machine, on average 8 hours per day and packaging standard products with standard vacuum
packaging materials. No rights can be derived from this indication)
DOUBLE SEAL
2 x 3,5 mm
seal
CU
T
-OFFSEAL
1 x 3,5 mm seal
1 x 1,1 mm cut
s
in
g
le time settin
g
1-2 CU
T
-OFFSEAL
1 x 3,5 mm seal
1 x 1,1 mm cut
individual time
WIDE SEAL
1 x 8,0 mm
seal
BI-ACTIVE SEAL
1 x 5,0 mm seal
above and below
Remove tensioner(s) and
filter(s) from the housing
Take care that the filter gasket does not
remain behind when removing the filter
Pumps and housing can have a different appearance but the principle of replacing remains the same.
Take care that the correct type of filter is used for the pump type, see page 29 for the correct type of filter for the type of
pump
It is advisable to have the suppler do this service.
Place and tension the new filter (take
care that the gasket is correctly
positioned) in the housing
Screw the cover back onto the housing
Screw the back or side plate on the
machine
Open rear or side of
machine for pump
The filter(s) is/are visible
behind a tensioner
Screw the cover(s)
from the filter
housing)
Release the tensioner(s)
with a spanner
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman POLAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman POLAR in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman POLAR

Henkelman POLAR User Manual - German - 44 pages

Henkelman POLAR User Manual - Dutch - 43 pages

Henkelman POLAR User Manual - French - 46 pages

Henkelman POLAR User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info