647375
27
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 27
SILICONE HOLDER AND LID GASKET MAINTENANCE
Replace the rubber silicone holder
The silicone holder must be inspected weekly for irregularities on the silicone rubber (mainly caused by burning by the
sealing wire). If irregularities appear then the silicone rubber must be replaced.
Average maintenance cycle for silicone rubber is at least once every 6 months
(This indication refers to regular use of the machine with standard products. No rights can be derived from this indication)
1. Remove the old silicone rubber from the holder.
2. Cut a new piece of silicone rubber the same size as the old one. The same
size is very important, too short or too long will cause problems with sealing.
3. Place the new piece in the silicone holder. Ensure that the silicone rubber is
completely and evenly placed in the groove. It is also important that the
surface of the silicone rubber is smooth after it is in place and is shows no
signs of tension.
Replace lid gasket
The lid gasket ensures that the vacuum chamber is completely sealed during the
machine cycle. This is essential for achieving a maximum vacuum. The lid gasket
wears due to the extreme pressure differences and must be replaced regularly.
Inspect the lid gasket weekly for tears or damage.
Average maintenance cycle for lid gasket is at least once every 6 months
(This indication refers to regular use of the machine, on average 8 hours a day and with standard
products. No rights can be derived from this indication)
De length of the new lid gasket is determined by using the old gasket. If the lid
rubber is too short or too long it can cause problems closing the lid or leak.
The rubber must be placed evenly and without tension in the holder. The ends must be cut straight and must be laid
tightly against each other to avoid leakage.
Ensure that the ends of
the lid rubber connect
up closely
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman POLAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman POLAR in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman POLAR

Henkelman POLAR User Manual - German - 44 pages

Henkelman POLAR User Manual - Dutch - 43 pages

Henkelman POLAR User Manual - French - 46 pages

Henkelman POLAR User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info