647375
23
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 23
Changing Oil / Filling Up
The oil level and oil quality must be checked at least once a week. The oil inspection window serves this purpose. Fill up
the oil level if it is too low. Replace the oil if it is turbid. Oil must be replaced at least once every 6 months.
BOXER series
1. Oil fill plug
2. Oil drain plug
3. Oil inspection window
4. Oil level indicator sticker
MARLIN / FALCON / POLAR series
Draining oil
If the oil is white or turbid when checked then it must be replaced. Before draining
off the oil let the conditioning program run a full cycle. The dirt and moisture is
absorbed by the oil and the oil becomes thinner making draining easier.
After the program has ended the drainage plug can be removed.
CAUTION
, when unscrewing hot oil fumes can escape. The oil now drains from
the drain hole (an oil pan must be placed underneath). For the BOXER series,
when the oil has drained, tilt the machine slightly so that all residual oil can drain
off. After draining the oil drain plug is replaced.
Filling up oil
After draining or if the oil level has dropped, oil needs to be filled up. The oil fill plug must be removed with the correct
size spanner. The pump can now be filled with oil. Make sure that you add the correct amount (see table on page 24)
TAKE CARE
to fill with small amounts at intervals. Fill the oil level to the top of the oil level indicator sticker.
TAKE CARE
to replace the oil filter before adding the new oil (see page 24)
Oil types and amounts
It is important to use the correct type and quantity of oil for the pump. The wrong type or too much oil could damage the
pump. The ambient temperature where the machine is operated is also important for the type of oil. See amounts and
types with related ambient temperatures in the table on the next page.
Examples of supplier brands for the standard types of oil are Shell Vitrea, Aral Motanol GM, BP Energol CS, or Texaco
Regal R+ O with related viscosity numbering. If the machine is used outside normal specifications regarding ambient
temperature, contact the supplier or Henkelman BV.
Location at rear or side of machine
View can differ per model
Take care to use the correct t
y
pe
of oil for the pump
Beware of hot oil fumes during
drainage
1
2
3 4
1
2
3
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman POLAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman POLAR in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman POLAR

Henkelman POLAR User Manual - German - 44 pages

Henkelman POLAR User Manual - Dutch - 43 pages

Henkelman POLAR User Manual - French - 46 pages

Henkelman POLAR User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info