Manual Hendi 230442 (page 13 of 144) (English, German, Dutch, French, Italian, Polish)

742508

Zoom out

Zoom in

1/144

Parameter Scope Unit of change

Current time 00:00-23:59 1

Regeneration type/operation mode A-01, A-02, A-03, A-04 -

Regeneration start time 00:00-23:59 1

Number of days between regenerations 0-99 1

Time of back rinse 0 – 99 1

Time of brine draw and slow rinse 0 – 99 1

Time of water reﬁll in water tank 0 – 99 1

Time of fast rinse 0 – 99 1

Type of external signal sent b-01, b-02 -

Cleaning and maintenance

Controlling the level of salt and refilling thereof

The quantity of salt in the salt tank shall be checked

regularly (recommended once per week), so that it

never runs out. Table 2 presents average salt con-

sumption per regeneration. Salt shall be replen-

ished as the consumption thereof progresses, so

that its level is always above water level. (Water

shall not be visible). Exclusively tablet salt intended

for water softening shall be used.

ATTENTION! Salty water (brine) may cause eye, skin and wounds irritation. Do not touch

or otherwise contact it. In case of contact, wash brine with tap water.

Preventing the agglomeration of salt

High air humidity or a wrong type of salt may cause

the formation of large salt chunks (salt deposits) in

the salt tank. The process may protrude the prepa-

ration of the proper amount of brine and, as a re-

sult, prevent the proper regeneration of the device.

As a result, water will not be softened.

In case of a suspicion that a salt deposit was

formed, one may knock on the walls of the salt tank

or pour hot water over the salt deposit to break it.

A salt chunk may also be broken into pieces with

a long

object (e.g., a pipe). If salt agglomerated excessive-

ly as a result of bad quality thereof, the brine tank

shall be rinsed and ﬁlled with salt of proper quality.

Salt deposit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 230442 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 230442 Manual

Product: