Manual Hendi 230442 (page 12 of 144) (English, German, Dutch, French, Italian, Polish)

742508

Zoom out

Zoom in

1/144

Note: excessive time of filing the brine tank may

cause the overflow of water to sewage or outside

of the device. The supplier of the device shall not

be held responsible for any damages resulting

from improper setting of this parameter.

• (5) Fast rinse - time of fast rinse. E.G., 5 - 10M

time of the 5th cycle of operation is 10 minutes

(m - indication in minutes)

• The type of external signal send by the head. B-01

– a permanent signal during entire regeneration

(from the moment of leaving “in serv” position

to the moment to returning thereto. “In serv” –

signal only when the head changes its position

(head’s servo working).

mmol / l mval / l

mg CaCO3 / l

(ppm)

German

degree

French

degree

gpg

1 mmol / l = 1 2 100 5.6 10 5.8

1 mval / l = 0.5 1 50 2.8 5 2.9

1 mg CaCO3 / l = 0.01 0.02 1 0.056 0.1 0.058

1 German degree = 0.179 0.357 17.9 1 1.79 1.04

1 French degree = 0.1 0.2 10 0.56 1 0.58

1 gpg = 0.143 0.29 14.3 0,8 1.43 1

Sample controller programming:

If the keypad lock symbol is present on the display,

it has to be unlocked by pressing and holding up

the up [11] and down [12] button, until the key sym-

bol disappears.

1. In order to activate the setting change mode, the

Enter [9] button shall be pressed.

2. The [8] and [6] symbols will be lit in the settings

change mode. It will inform that the display

shows the current time. The colon (”:”) symbol

will be blinking between the indicator of hour

and minutes.

3. In order to activate the current time change

mode, the enter [9] button shall be pressed.

The indication of time and the [8] symbol will

start blinking.

4. In order to adjust the indication of hours, the up

[11] and [12] down buttons must be pressed cor-

respondingly.

5. In order to conﬁrm the setting selected, the en-

ter [9] button shall be pressed. The selected in-

dication will be accepted and the controller will

go to the minutes setting mode.

6. In order to adjust the indication of minutes, the

up [11] and [12] down buttons must be pressed

correspondingly. In order to conﬁrm the setting

selected, the enter [9] button shall be pressed.

The controller will conﬁrm changing the time

with a short sound signal and will return to the

parameters setting mode.

7. In order to move to another option, the down [11]

button shall be pressed.

8. In order to activate the mode of changing anoth-

er option, the enter [9] button shall be pressed.

The indication of time and the [8] symbol will

start blinking. With the down [11] and Up [12]

button, the desired value shall be chosen and

conﬁrmed with the enter [9] button.

The controller will conﬁrm changing the time

with a short sound signal and will return to the

parameters setting mode.

9. In order to activate the setting change mode, the

enter [10] button shall be pressed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 230442 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 230442 Manual

Product: