741203

Hendi 226094 Manual

9
Zoom out
Zoom in
Previous page
1/40
Next page
TRANSFORMATION AND ADAPTATION
To convert the appliance to another type of gas, e.g. from natural gas to LPG, the nozzles of the main burner, by-pass and pilot
light have to be changed. All the nozzles are marked with a number that indicates the diameter in 1/100 of a mm and are
supplied in a bag. After each conversion or adaptation, the unit must undergo an operating test and the supplementary plate
must be updated according to the conversion or adaptation carried out.
Connection to the distribution network, installation, and maintenance of the appliance must only be carried out by
qualified technicians only, in observance of all applicable regulations!
COOKTOP BURNER, NOZZLES AND AIR ADJUSTMENT
BURNER:
1. Pull the knobs off.
2. Remove the control panel by unscrewing the fixing screws at the rear.
3. Replace nozzle with a suitable one for the new type of gas indicated in the "MAX" nozzles table.
MINIMUM:
4. Unscrew and replace or adjust the minimum by-pass nozzle fig.8 on the basis of the indications in the nozzles table.
5. Remove the control panel.
6. Replace the knob.
OVEN BURNER
To replace the nozzle of the oven burner, the pilot light and adjust the primary air, follow the instructions below:
BURNER:
1. Remove the base of the oven fig.7.
2. Unscrew and replace the nozzle with a suitable one for the new type of gas indicated in the "MAX" nozzles table.
ADJUSTING THE AIR:
3. Loosen fixing screw
4. Adjust the primary air mount the bush a distance indicated in nozzles table.
5. Block the bush, by screwing in fixing screw.
MINIMUM:
6.Adjust the minimum by-pass nozzle fig.16 on the basis of the indications in the nozzles table.
7. Replace the knob.
If the bottom of the oven chamber is removed, it must be put back in exactly the same position.
GRILL OVEN BURNER
To replace the nozzle of the grill oven burner, the pilot light and adjust the primary air, follow the instructions below:
BURNER:
1. Remove the grill oven burner.
2. Unscrew and replace the nozzle with a suitable one for the new type of gas indicated in the "MAX" nozzles table.
3. Block the bush, by screwing in fixing screw.
MINIMUM:
4. Unscrew and replace or adjust the minimum by-pass nozzle fig.16 on the basis of the indications in the nozzles table.
5. Replace the knob.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 226094 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 226094 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info