295355
28
Zoom out
Zoom in
Previous page
1/40
Next page
IS0
25
-
1000. When a dedicated
flash unit, such as the
Hasselblad
D-Flash 40, or another unit
complying with
the
European SCA-standards
is
connected
to the dedi-
cated flash socket
-
directly or through a suitable
adapter-
and
switched on, the
green flash symbol
in
the viewfind-
er automatically
lights up when the
flash is charged and
operative.
If a plus or
minus flash metering adjustment
has
been entered,
the
right hand plus/minus sign also
appears
in the display.
Your
202FA
controls
the flash duration by
TTL/OTF me-
tering
(TTL=ThroughThelens;OTF
=
0ff The
Film),
i.e. it meters
the
light reflected off the
film and termi-
nates
the
flash when the exposure
is
correct.
There is of
course also the
possibility of connecting the
flash
unit
to
the PC socket, but then
you no longer have the advantage
of
letting
the
camera system
control the flash and the ex-
posure. The camera continues
to operate
in
the selected
mode
with
the calculated or
pre-set shutter speed.
If
an
automatic
mode is desired
for
the
camera the D mode
is
recommended. Meter the selected
subject area,lock the
metered value and
make the desired adjustments.
Then
adjust the aperture or use the
adjustment
keys
until
the
shutter
speed figure stops
flashing to be sure that the
shutter speed
will be slower than
I
/90
s.
Note that even
the displayed
l/90 s could be
flashing!
lf the shutter speed
is faster than I
/90
s
the
shutter speed display
flashes and
no
sync
signal
is
generated
to
trigger the
flash.
Using
a.de-dicoted
flash unit
Described below orethree
different
methods
of
us-
ing a dedicated
flosh unit occording
to mode,
nomely:
.
Flash
set
at TTL
mode.
.
Flash set at automatic
mode
.
Flash set at
manual mode
For
the
operation of the
flash unit see the
flash unit in-
struction manual.
Functions:
'
Fully automatic
exposure control
through TTL/OTF
metering.
'
Exposure with pre-set aperture
and shutter speeds
slower than
l/90 s.
'
Pre-set flash exposure adjustment
-3
to +l
EV
through
Pr mode indicated
by
the
right hand
minus
/
plus sign.
'
Display warning when the
pre-set or calculated
shutter
speed
is faster
than
I
/90
s.
'
Viewfinder
indications when the
flash unit is charged
and
ready to flash.
'
Viewfinder warning
at over- and underexposure
or
disabled
flash triggering.
Suggested
progedurel
:::tii:ttiii:t:Ijtfr,ii''
'ti.,if,
|itiit,
l. Attach and connect the
flash
according
to the
flash
manual.
2. Set the flash unit at
TTL or corresponding
mode and
switch it on.
Activate the camera. When the
flash unit
is charged and
ready to flash the green
flash symbol
lights up in the viewfinder.lf
a flash power adjustment
has been entered, the
r.h. plus/minus sign also appears
in the display.
3. In manual
mode, pre-set the aperture and set
the shut-
ter speed
not
to
exceed l/90s.In automatic
mode fol-
low the recommended
procedure!
27
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hasselblad 202 fa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hasselblad 202 fa in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info