295355
26
Zoom out
Zoom in
Previous page
1/40
Next page
6.
Use the adjustment buttons
to adjust the exposure
up
or down to the desired
level with
l/:
EV increments.
You can display the
pre-set aperture by depressing the
exposure release button
to the pressure point, and
you
can change
it if required.
The
shutter
speed adjusts au-
tomatically
to the new aperture setting,
keeping the
exposure unchanged.
7, Depress the
exposure release button
fully
to
make an
exposure.
8. Rewind the camera
to cock the shutter and advance
the
film
to the
next frame with the
previous exposure
values and adiustments
maintained.
The
metering system can also be start-
ed by depressing
the exposure
release
button.lt then
recalls
the
latest stored
exposure
value including any adjust-
ments.
All
settings
remain unchanged
until
they
are erased and the
system un-
locked by depressing
the
AE-lock but-
ton
or by
removing the battery.
A
-
Automa'tic
mode'
Function:
gfi:::::::i
'
Automatic
exposure with aperture
priority,
pre-select-
ed film speed and
automatically
calculated shutter
speed.
Features:
'
Continuous
metering of the
light value.
'
Locking and
storing of the
light value at a selected
mo-
ment
by
keeping the
exposure button at the
pressure
point.
'
Permanent adjustment
of the continuous
or stored
light value
+5 EV-steps in
l/r
step
increments.
Normal exposure.
Functions:
'
Manual
pre-setting of aperture as
well as shutter
speed.
Features:
'
Completely
manually controlled exposure.
'
Continuous
metering of the
light value.
'
Continuous
indication of the difference
in EV between
the
pre-set exposure
and the exposure
calculated by
the camera's CPU.
Ho1w
to- use.th.e
"M"
mod
The M mode is completely
manual. The
metering system
is working, but
it does not change the shutter
speed
(the
aperture is always
pre-set manually).
The display
indi-
cates
the calculated
"normal"
exposure
for the
metered
subject
part, but the exposure
will be executed
according
to
the manual settings
made.
Suggested
procedure:
l. Pre-set the film speed
with the film speed
dial on the
E-
(or
TCC-) magazine or using
the Pr mode with a
standard
magazine.
(This
point may
be
omitted but
is required for
a correct
indication on the viewfinder
display).
2. Set the
Mode Selector Dial to
M.
3. Set the
aperture.
4. Depress the exposure
release or the
pre-release button
to the
pressure point.
The metering system starts and
the viewfinder
display shows
the symbol
"M"
for
Manual mode and the
pre-set aperture and
shutter
speed.
5.
Release the exposure
button.
Instead of the aperture
value the display starts
showing the
difference
in EV-
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hasselblad 202 fa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hasselblad 202 fa in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info