Manual Harman Kardon AVR520 (page 40 of 56) (English)

502629

Zoom out

Zoom in

1/56

Notes on Using the AVR 520 Remote

With Other Devices.

• Manufacturers may use different code sets

for the same product category. For that rea-

son, it is important that you check to see

whether the code set you have entered oper-

ates as many controls as possible. If it

appears that only a few functions operate,

check to see whether another code set will

work with more buttons.

• When a button is pressed on the AVR 520

remote, the red light under the

Input

Selector

e for the product being operat-

ed should flash briefly. If the Device Control

Selector flashes for some but not all buttons

for a particular product, it does NOT indicate

a problem with the remote but rather that

no function is programmed for the button

being pushed.

Volume Punch-Through

The AVR 520’s remote may be programmed to

operate the

Volume Control and Mute

functions of either the TV or the AVR 520

in conjunction with any of the devices con-

trolled by the remote. For example, since the

AVR 520 will likely be used as the sound sys-

tem for TV viewing, you may wish to have the

AVR 520’s volume activated, although the

remote is set to run the TV. Either the AVR 520

or TV volume control may be associated with

any of the remote’s devices.To program the

remote for Volume Punch-Through, follow these

steps:

1. Press the

Input Selector e for the unit

you wish to have associated with the volume

control and the

Mute Button at the

same time until the red light appears under

the

Input Selector e and note that the

Program/SPL Indicator c will flash

amber.

2. Press the

Volume Up Button and

note that the

Program/SPL Indicator c

will stop flashing and stay amber.

3. Press either the

AVR Selector f or the

Input Selector e, depending on which

system’s volume control you wish to have

attached for the punch-through mode. The

Program/SPL Indicator c will blink

green three times and then go out to confirm

the data entry.

Example: To have the AVR 520’s volume

control activated even though the remote is

set to control the TV, first press the

Video/TV Input Selector e and the

Mute Button at the same time. Next,

press the

Volume Up Button , fol-

lowed by the

AVR Selector f.

NOTE: Should you wish to return the remote to

the original configuration after entering a

Volume Punch-Through, you will need to repeat

the steps shown above. However, press the same

Input Selector in Steps 1 and 3.

Channel Control Punch-Through

The AVR 520’s remote may be programmed to

operate so that the channel control function for

either the TV, cable or satellite receiver used in

your system may be used in conjunction with

one of the other devices controlled by the

remote. For example, while using and controlling

the VCR, you may wish to change channels on a

cable box or satellite receiver without having to

change the device selected by the AVR 520 or

the remote. To program the remote for Channel

Control Punch-Through, follow these steps:

1. Press the

Input Selector Button e for

the device you wish to have the channel con-

trol associated with and the

Mute Button

at the same time until the red light

appears under the

Input Selector e and

the

Program/ SPL Indicator c flashes

amber.

2. Press the

Volume Down Button .The

Program/SPL Indicator c will stop flash-

ing and stay amber.

3. Press and release the

Input Selector

Button

e for the device that will be used

to change the channels. The

Program/SPL

Indicator

c will blink green three times

and then go out to confirm the data entry.

Example: To control the channels using your

Cable Box or Satellite Receiver while the

remote is set to control the VCR, first press

the

VID 1/VCR Input Selector Button e

and the Mute Button at the same

time. Next, release them and press the

Volume Down Button , followed by the

VID 2/TV Input Selector Button e.

NOTE: To remove the Channel Control Punch-

Through and return the remote to its original

configuration, repeat the steps shown in the

example above. However, press the

VID 1/VCR

Input Selector

in Steps 1 and 3.

Transport Control Punch-Through

The AVR 520’s remote may be programmed to

operate so that the

Transport Control

Functions

z (Play, Stop, Fast Forward,

Rewind, Pause and Record) for a VCR, DVD or

CD will operate in conjunction with one of the

other devices controlled by the remote. For

example, while using and controlling the TV, you

may wish to start or stop your VCR or DVD with-

out having to change the device selected by the

AVR 520 or the remote. To program the remote

for Transport Control Punch-Through, follow

these steps:

1. Press the

Input Selector e for the device

you wish to have the channel control associ-

ated with and the

Mute Button at the

same time until the red light appears under

the

Input Selector e and the Program/

SPL Indicator

c flashes amber.

2. Press the

Play Button z.The Program/

SPL Indicator

c will stop flashing and

stay amber.

3. Press and release the

Input Selector

Button

e for the device that will be used

to change the channels. The

Program/SPL

Indicator

c will blink green three times

and then go out to confirm the data entry.

Example: To control the transport of a DVD

player while the remote is set to control the

TV, first press the

VID 2/TV Input Selector

Button

eand the Mute Button at

the same time. Next, release them and press

the

Play Button z, followed by the DVD

Input Selector Button

NOTE: To remove the Channel Control Punch-

Through and return the remote to its original

configuration, repeat the steps shown in the

example above. However, press the

VID 2/TV

Input Selector

in Steps 1 and 3.

NOTE: Before programming the remote for

Volume, Channel or Transport Punch-Through,

make certain that any programming needed for

the specific TV, CD, DVD, Cable or Satellite

Receivers has been completed.

40 PROGRAMMING THE REMOTE

Programming the Remote

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR520 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR520 Manual

Product: