495079
56
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
56
EXPRESSION
13. EXPRESSION - SOURCE (G)
Determines what to use for controlling the Expression.
PED(NORM):
Uses V-20R etc.
PED(REV):
Uses KORG XVP-10 etc.
MIDI IN:
Uses the Expression Information received at the keyboard channnel UPPER.
14. EXPRESSION - MONITOR
Displays the present Expression Value. You can find the causes for such troubles as “no
sound”, “non-function” of the Expression Pedal, by checking if the Expression Value
changes normally. Also, this can be a guide when you want to play the “fade in” from
“quiet”.
15. EXPRESSION - MINIMUM LEVEL (G)
It sets the output level when the Expression is the minimum.
The setting range is OFF, -60db to 0db. “OFF” makes no sound when the Expression is
minimum, “0dB” does not reduce the volume level.
16. EXPRESSION - LIMIT LF (G)
17. EXPRESSION - LIMIT HF (G)
These are for setting the level to maintain for low and high frequencies when the Expres-
sion is the minimum.
The setting range is OFF, -60dB to 0dB. This function does not work at “OFF”. Other-
wise the level is maintained even if the Expression is minimum.
18. EXPRESSION - GAIN (S)
This is for adjusting the gain (=range of the change) of the connected expression pedal.
It sometimes occurs that, even if you press the expression pedal all the way down, the
expression value does not reach the maximum value (127), due to the difference of each
expression pedal model from model. In such a case, adjust this parameter for getting the
maximum range of the change.
NOTE: This parameter is a System Parameter. This parameter will be recorded when set. It
is common in each Patch.
1 2 3 4 5 6 7
8 9
10 11 12
13 14 15 16 17 18 14
19 20
21 22
EXPRESSION LIMIT
One of the human ear’s characteristics is that,
when the volume falls, the sound of high or low
frequency becomes difficult to hear.
On this model, it is rectified. The volume is main-
tained above a certain level even when the volume
goes down by using the Expression, in order to
keep the sound of high or low frequency audible.
The similar function is adopted on most home au-
dio equipments. It is called the “loudness” func-
tion.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info