495079
54
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
54
CONTROL
In this mode, settings of various controllers are made.
Effects can be set to the controllers mounted on the MIDI
keyboards connected to this unit such as Pitch Bend, Pres-
sure, etc. Also, there are connecting terminals for the Foot
Switch and the Expression Pedal on the rear panel. You
must select and set their purpose.
To locate this mode:
Touch the [MENU/EXIT] button and display the MENU, touch
the [PAGE] button and select PAGE A, choose “CONTROL
by the [PARAM] button, and touch the [ENTER] button.
PITCH BEND
1. BEND - L&U DOWN (P)
2. BEND - L&U UP (P)
3. BEND - PEDAL DOWN (P)
4. BEND - PEDAL UP (P)
These are for setting the changing range of the PITCH-BEND by the semi-tone.
Both the LOWER and the UPPER PARTS change at the same time, as they use the same
Tone-Wheels.
The setting range is 0 - 12 for up, 0 - 24 for down.
5. BEND - MODE (P)
It switches the function of the PITCH BEND information.
BEND:
You can slide the pitch by changing the PITCH BEND information.
MOTOR:
You can control the TONE-WHEEL motor. The motor turns on when it is in the
center or in the neutral position, stops when you turn down, and accelerates
when you turn up.
6. BEND - TIME (P)
This sets the time for slowing down to stop or accelerating the motor when it [= MODE(5)]
is in the MOTOR mode.
The value ranges from 0.1[s] to 5.0[s].
7. BEND - AMPLIFIER (P)
This decides whether to turn off the amplifier or not by turning down the PITCH BEND
information.
1 2 3 4 5 6 7
8 9
10 11 12
13 14 15 16 17 18 14
19 20
21 22
MOTOR
There is no pitch-bend function on the B-3/C-3.
So some musicians turned off the power while
playing it in order to get that effect.
If the B-3/C-3 is turned off, the Tone-wheel motor
gradually slows down and stops, and the amplifier
does as well. This function is to simulate that on
this model.
HOW PITCH BEND MODE WORKS
BEND: The pitch immediately falls.
MOTOR: The pitch gradually falls down to the
set point.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info