495079
52
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
52
In this mode, you can give names to patches, set how to recall them, and set the
Preset Buttons for the Drawbar Controller XMc-2.
To locate this mode:
Touch the [MENU/EXIT] button and display the MENU, touch the [PAGE] button and select
PAGE A, choose “PATCH” by [PARAM] button, and touch the [ENTER] button.
PATCH NAME
1. PATCH NAME (P)
This allows you to name the present Patch using up to 10 letters.
Move the cursor with the [PARAM] button, and choose the let-
ters with the [VALUE] knob.
This change will be lost if you do not record it, same as the other
Patch Parameters.
NOTE: The parameters by the names with (P) on the tail are Patch
Parameters, and are recorded to each Patch.
PATCH LOAD
This allows you to set the operation when you recall the Patch.
2. PATCH LOAD - UPPER (B)
This allows you to set whether or not to recall the Drawbar Reg-
istration of UPPER Part.
3. PATCH LOAD - LINK LOWER/PEDAL (G)
This allows you to determine whether or not to recall the Draw-
bar Registration of the LOWER and the PEDAL Parts.
4. PATCH LOAD - DRAWBAR (B)
This allows you to determine whether or not to recall the Param-
eters relating to the Drawbars of each Part, such as the Tonewheel
Set.
5. PATCH LOAD - PERCUSSION (B)
This allows you to determine whether or not to recall the Param-
eters relating to Percussion.
6. PATCH LOAD - SPLIT / MANUAL BASS (G)
This allows you to determine whether or not to recall the Param-
eters relating to the SPLIT or the MANUAL BASS.
7. PATCH LOAD - EQ/RV (G)
This allows you to determine whether or not to recall the Param-
eters relating to the EQUALIZER and REVERB.
8. PATCH LOAD - ANI/OD (G)
This allows you to determine whether or not to recall the Param-
eters relating to VIBRATO, OVERDRIVE and LESLIE.
PATCH NUMBERS
9. to 13. PATCH NUMBERS (G)
Set the Patch Numbers for assigning to each Preset Button
on the Drawbar Controller XMc-2.
This setting can be made not only by this operation but also by
touching the Preset buttons on the XMc-2 holding down the
[RECORD] button on this unit.
NOTE: Each Parameter (G) of Patch Load except LINK LOWER/
PEDAL is a Global Parameter, which is recorded at the
time of setting, and common in each Patch.
PATCH
3
1
2 3 4 5 6
7 8
9 10 11 12 13
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info