495079

Hammond XM-2 Manual

51
Zoom out
Zoom in
Previous page
1/90
Next page
Setting The Parameters
51
8. FOLD-BACK - HIGH
This allows you to set which key the 1' Drawbar starts to FOLD-BACK (= repeat the
same octave) in the upper-most range. The set range is 4G - 5C.
NOTE: The FOLD-BACK can be set not only on the 1' but also 1 1/3', 1 3/5', 2' and 2 2/3'
Drawbars.
Setting the PEDAL
9. TONE-WHEELS
This allows you to select the Tone-wheel waveform of the PEDAL part.
Normal: The traditional B-3/C-3 Tone-wheel sound
Muted: Analog sound represented by the X-5.
Synth1: Sawtooth waveform with swept filter.
Synth2: Dull square waveform.
10. ATTACK
This allows you to set the Attack Rate and the Key-Click Volume at ATTACK and RE-
LEASE.
MAX CLK: Immediately attacks and the key-click is loud.
NORM CLK: Immediately attacks and the key-click is normal.
SOFT CLK: Immediately attacks and the key-click is soft.
NO CLK: A slightly slower attacks without key-click
SLOW ATK: Slow attack without key-click
11. DECAY RATE
This allows you to determine whether to keep voicing or to decay, or set the decay time,
while holding down the key.
The setting range is 1 - 5 and C. The longer the value gets, the longer is the decay time.
No decay at C.
12. SUSTAIN - ON
This allows you to set whether or not to use the Sustain function.
13. SUSTAIN - LENGTH
This allows you to set the Release Rate (= the decay time after you release the key),
when the SUSTAIN - ON (item #12) is ON.
1 is the shortest. And 5 is the longest.
14. VELOCITY
This allows you to set the response to the Velocity. The setting range is OF and 1 - 4. At
OF, the volume does not change however hard you may touch the key. As the value
increases from 1 - 4, the sound gets louder even if you touch the key softly.
15. KEY MODE
This allows you to set the Pedal polyphony.
POLY: Makes it possible to play chords (up to 3 notes)
MONO: Only the lowest note will sound, when you play a chord.
NOTE: The previously released note will be cut when you touch the new one, even when
the PEDAL is in the POLY mode and SUSTAIN is ON.
NOTE: When the note-data of the Pedal are received from the MIDI IN terminal while the
value of the parameter [MIDI IN] (P. 68 #2-4) is “CH”, the Pedal produces polyphonic
sound, regardless of the value.
NOTE: All the parameters in these modes are Patch Parameters. They are recorded into
the Patch.
SUSTAIN
This is the function that the volume slowly fades out
after the key is released, not like that of the synthesiz-
ers.
VELOCITY
“Velocity” is the speed of the key is depressed.
When you touch the piano hard, the hammer hits the
string hard and so the sound is loud.
The organ key is, on the other hand, generally only the
switch to open the valve, and so the sound does not
change however hard you may touch the key.
So this function is effective if you use it when the De-
cay Rate is other than C, or Decay.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info