495079
50
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
50
Setting the Manual (LOWER and UPPER)
1. TONE-WHEELS
Select the TONE-WHEEL SET (waveform) for the manual part.
B-type: The traditional Tonewheel Sound of B-3/C-3
Mellow: Sine wave
Brite: The analog sound represented by X-5
2. CLICK - ATTACK LEVEL
This allows you to set the Key-Click VOLUME of the ATTACK (= when you touch the
key). The larger the value, the louder it gets. No key-click at 0.
NOTE: When this parameter is changed, also 4. Envelope - Attack Rate will be changed to
its suitable value automatically.
3. CLICK - LPF
This allows you to set the tone of the Key-Click.
The setting range is 0 - 127. The larger the value, the brighter it gets.
4. ENVELOPE - ATTACK RATE
This allows you to set the speed of the Drawbar at Attack (when you touch the key). The
more the value, the slower it gets. The volume will be maximum(= loudest) at 0 at the
time you touch the key.
5. CLICK - RELEASE LEVEL
This allows you to set the volume of the Key-Click at RELEASE (= when you release
the key). The larger the value, the louder it gets. No Key-Click at 0.
NOTE: When this parameter is changed, also 6. Envelope - Release Rate will be changed to
its suitable value automatically.
6. ENVELOPE - RELEASE RATE
This allows you to set the Decaying Speed of the Drawbar Sound at Release (when you
release the key). The higher the value, the slower the RELEASE gets. The sound dies at
0 at the same time as you release the key.
7. FOLD-BACK - LOW
This allows you to set at which key the 16' Drawbar starts the FOLD-BACK. (Fold-
back: Repeating the same octave in a certain range on the keyboard.)
The first key (= MIDI note number 36) is displayed as “1C”. The setting range is 1C -
2C.
TONE-WHEEL SET
Each Tone-wheel Set allows you to make finer adjust-
ment. (P. 60)
KEY-CLICK
The “Key Click” is the noise heard every time the key is
touched or released on the B-3/C-3, as the voice is
generated by mechanically switching ON and OFF on
these models. The function on this model simulates
the good old noise.
FOLD-BACK
As the number of the tonewheels was limited on the B-
3/C-3, the organs were designed to repeat the same
octave in the upper-most or lower-most range. The fea-
ture of this model is to simulate that.
In this mode, you can set the Parameter relating to the Drawbar sound of each part.
To locate this mode:
1. Touch the [MENU/EXIT] button and display the MENU, touch the [PAGE] button and select
PAGE A, choose “DRAWBAR” by the [PARAM] button, and touch the [ENTER] button.
2. Another option is to hold down the [DRAWBAR] button for a certain length of time.
DRAWBAR
1
2
3
4 5 6 7 8
9
10 11 12
13 14
15
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info