495079
55
Zoom out
Zoom in
Previous page
1/90
Next page
Setting The Parameters
55
MODULATION
8. MODULATION - LESLIE (P)
Use this for controlling the speed of the Leslie effects by the Modulation Information.
SPEED:
This changes the speed of the Leslie effects according to the Modulation Infor-
mation between Slow to Fast, continuously.
FAST:
If the Modulation value is less than 63, the mode of the Leslie effect is SLOW. If
64 or higher, FAST.
OFF:
It does not function
9. MODULATION - OVERDRIVE (P)
Use this for controlling the amount of OVERDRIVE by the Modulation Information.
ON: The amount of OVERDRIVE changes according to the Modulation Information.
OF: Does not function.
PRESSURE
10. PRESSURE - LESLIE (P)
Use this for controlling the speed of the Leslie effects by the Pressure Information.
SPEED:
The speed of the Leslie effects continuously changes between SLOW and FAST
in accordance with the Pressure Information.
FAST:
The mode of the Leslie effects gets SLOW when the Pressure value is less than
32, and goes FAST when the value is 81 or more.
OFF:
Does not function.
11. PRESSURE - OVERDRIVE (P)
Use this for controlling the amount of OVERDRIVE by the Pressure Information.
ON: The amount of OVERDRIVE changes according to the Pressure Information.
OF: Does not function.
12. PRESSURE - PITCH BEND (P)
Use this for controlling the amount of PITCH BEND by the
Pressure Information.
UP:
The pitch goes up in accordance with the Pressure Information.
DOWN:
The pitch goes down in accordance with the Pressure Information.
OFF:
Does not function.
NOTE: The parameters by the names with (P) on the tail are Patch Parameters, and are
recorded to each Patch. (G) is for “Global”. These parameters will be recorded
when set, and are common in each Patch.
BRAKE ON MODULATION
If you want to “Brake” the Leslie effect by pulling
the modulation wheel forward, set the Slow Speed
to “0” on Leslie Parameter (P. 62).
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info