495079

Hammond XM-2 Manual

57
Zoom out
Zoom in
Previous page
1/90
Next page
Setting The Parameters
57
FOOT SWITCH
19. FOOT-SWITCH - TIP (G)
This is used for setting the function for the Foot Switch 1 terminal.
If you are using the Foot Switch with the stereo plug, this sets the function on the tip side.
OFF:
Does not work.
LESLIE S/F ALT:
LESLIE S/F MOM:
These are for switching the SLOW/FAST Leslie Effect.
At ALT, it switches at each press and, at MOM, the Leslie effect goes Fast, as long as
you keep pressing the foot switch, and it goes slower Slow if you release it.
DAMPER UPPER:
DAMPER LOWER:
DAMPER PEDAL:
They sustain the Notes of the UPPER, LOWER and PEDAL Parts, respectively, as
long as you keep depressing the footswitch.
PATCH FWD:
PATCH REV:
They are for switching one Patch to the right (FWD) or the left (REV).
SPRING:
This is for producing a sound of the old Spring Reverb.
DELAY TIME:
It sets the delay time of the reverb effect (P. 67) along the kicked intervals.
20. FOOT-SWITCH - RING (G)
This is for setting the function on the RING side if you use the FOOT SWITCH equipped
with the Stereo plug.
DISPLAY
21. DISPLAY - SHORT CUT (G)
It sets the time limit in seconds for the short cut function.
The range is 1s to 2s and NO short cut. The short cut function does not work when the value
is in “NO”.
22. DISPLAY - TIME OUT (G)
It sets the time limit to return to the previous mode from the one displayed by using the short
cut operation.
The range is 4s to 16s and NO time out. The time out function does not work when the value
is in “NO”.
NOTE: The parameters by the names
with (P) on the tail are Patch Pa-
rameters, and are recorded to
each Patch. (G) is for “Global”.
These parameters will be re-
corded when set, and are com-
mon in each Patch.
DAMPER
The word “Damper” comes from the damper pedal
of the piano.
The piano stops sounding when you release your
finger from the key. This is because of the damper
system. While you hold the damper pedal, the sys-
tem does not work and so it keeps sounding even
after you release the key.
SPRING REVERB
The Spring Reverb is a reverb effect to obtain the
reverberation using the spring resilience. It was
easily affected by a shock and it used to give a big
“clang” if it was bumped.
However, this drawback has come to be used as
an effect in the genre of progressive rock. This
module gives the simulated sound.
TIP AND RING
When you look at the plug of the stereo head-
phones, there are 3 metal parts. The head portion
is called “Tip” and the middle portion is the “Ring”.
The part on the cord side is called the “Sleeve”.
The ordinary foot-switch has only the Tip and the
Sleeve, but the footswitch with two switches in
one plug or two footswitches using the L/R con-
verting cable can be connected.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info