812037
17
Zoom out
Zoom in
Previous page
1/40
Next page
17
The cleaning of the burner pot may only be
performed with the stove cooled down and in
the operating state „OFF“, otherwise the
danger of burning exists!
For this, the burner pot must be removed from the
stove and the burner wedge withdrawn. After
removing the burner pot, possible ash residues in
the stove below the burner pot can also be
removed.
After cleaning, the burner pot is to be replaced in
the burner seating in the correct position and the
burner wedge reinserted in the burner pot. Check
again the correct seating of the burner pot in
order to avoid leaks.
The LED-display, which is located below right on
the front panel, also provides assistance with
regard to the cleaning interval. The following
indication possibilities exist:
LED-display lights up green – Burner is clean.
LED-display lights up yellow – Burner is slightly
soiled and should be cleaned.
LED-display lights up red – Burner is so greatly
soiled that a safety shutdown will be initiated.
Attention!!!
This LED-display is only used for better
visualization of the burner soiling and as
assistance for the operator (similar to the
lamp for oil level in a car).
A visual inspection by the operator with
regard to the soiling of the burner and the
soiling of the furnace through ash and burned
waste must nevertheless be carried out at
regular intervals, depending on the quality of
fuel!!!
Picture 6: Burner pot dirty
Picture 7: Burner pot clean
The cleaning intervals for the burner pot and the
glass panel are directly related to the quality of
the wood pellets and can range from a few hours
of burning up to several days.
8.4 Removing ash from the furnace
To thoroughly clean the ash from the burner pot
and the furnace, the pellet stove must be in a
cooled-down state and in the operating mode
OFF.
Method:
Press the left key on the control unit repeatedly
until the information page appears – then press
right key (menu) – with the two middle keys, set
the cursor to operating modes – press right key
(select) – with the two middle keys, set the cursor
to OFF – press right key (Save) – stove begins to
cool down.
After the stove has cooled down completely, the
cleaning work can begin.
Attention!!
The cooling program of the stove is
completed after approx. 10 minutes, however
the stove may still be hot after the cooling
phase has finished.
Only start to clean the stove when it has
cooled down completely!!
To empty the ash tray, withdraw it forwards with
the handle.
The frequency of ash emptying is directly related
to the quality of the wood pellets used.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info