812037
19
Zoom out
Zoom in
Previous page
1/40
Next page
19
Pay attention to the electrical connections on the
blower motor and their correct seating.
Picture 10: Waste-gas ventilator
8.8 Cleaning the air filter
For the combustion, air is required which is drawn
in and controlled over the air filter housing and the
air volume sensor located behind it respectively.
To prevent soiling of the air volume sensor an air
filter has been installed. This should be inspected
and cleaned at intervals of 6-8 weeks. By
loosening the wing nut (1) the filter (2) can be
easily withdrawn and cleaned comfortably.
Operation without air filter is not permitted and
can lead to fault signals of the air volume sensor.
Picture 11: Air filter
9. Description of the components
9.1 Storage container (Pellet tank)
In the storage container, up to 30 kg of wood
pellets can be stored. This quantity enables a
continuous operation of up to 50 hours.
9.2 Worm motor / Screw conveyor
The worm motor drives the screw conveyor. As a
result, the wood pellets are conveyed from the
storage container into the furnace (burner pot).
The worm motor is speed-controlled and thus
adapts the necessary conveyed quantity to the
modular heating output (2.5KW to 8KW).
In the event that the screw conveyor blocks due
to foreign bodies in the wood pellets or excessive
fine content, this can often be remedied by simply
moving the work motor housing to and fro. A fault
on the worm motor is detected by the controller
and as a result the cooling phase is initiated
Picture 12: Worm motor
1 = Ignition
2 = Worm motor
3 = Convection air blower
9.3 Burner pot with burner wedge:
The burner pot is made from high-grade cast-iron.
In this burner pot (1) the burner wedge (2) is
inserted, which is also made from cast-iron. Due
to the special design of the burner pot, a clean
and extremely efficient burning of the wood
pellets is guaranteed.
Picture 13: Burner pot and burner wedge
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info