812037
16
Zoom out
Zoom in
Previous page
1/40
Next page
16
¾ In the second column the switch-ON times
(identified with the letter E) are
programmed with the two middle keys in
15 minute steps.
¾ With the right key (arrow), one can switch
columns from left to right.
¾ In the third column the switch-OFF times
(identified with the letter A) are
programmed with the two middle keys in
15 minute steps.
¾ In the fourth column, that period which lies
between the respective ON- and OFF time
is assigned the required target room
temperature.
¾ After the complete programming of the
weekday, by pressing the left key (Back),
the programming window for this weekday
can be saved and exited.
¾ The other days must also be programmed
in the same manner.
7.3.3.4 Programming example for the weekday
„Monday“
¾ Continue to press the left key until the
information page appears.
¾ Then press the lower middle key.
¾ Now that page appears, in which the
weekdays can be selected.
¾ With the two middle keys, move the cursor
so that the field Mo (Mo – means Monday)
is underlined with the cursor.
¾ Then press the right key (change).
¾ Now the programming window for the
weekday „Monday“ opens.
¾ In the first column are the position
numbers 1, 2 and 3
¾ In the second column the switch-ON times
(identified with the letter E) are
programmed with the two middle keys in
15-minute steps.
¾ With the right key (arrow), one can switch
columns from left to right.
¾ In the third column the switch-OFF times
(identified with the letter A) are
programmed with the two middle keys in
15-minute steps.
¾ In the fourth column, that period which lies
between the respective ON- and OFF time
is assigned the required target room
temperature.
¾ After the complete programming of the
weekday, by pressing the left key (Back),
the programming window for this weekday
can be saved and exited.
8. Cleaning and maintenance work
Due to the accumulation of ash resulting from the
burning of wood pellets, constant recurring
cleaning- and maintenance work is to be carried
out. With this as trouble-free an operation as
possible is effected.
As soon as you detect ash- and slag deposits in
the cold burner pot, this must be cleaned. See
operating instructions! If this is not done, the
slag will develop more and more. As a result, the
device can no longer ignite correctly. Pellets can
stack up in the burner pot. In extreme cases, this
can then extend back into the pellet chute. One
possible consequence would be a fire burning
back into the pellet container and a smoldering
fire in the pellet tank.
We therefore recommend to also inspect and
clean the cleaning opening below (see Pic.
10a+c) at the latest after 1000 kg of pellets.
Attention!
Devices that are not serviced in accordance
with our instructions may not be operated.
With non-observance all warranty claims
expire.
This destroys your device and is not covered
by the warranty.
Attention!
Before beginning cleaning work, the stove
must have cooled down, the ON/OFF-toggle
switch must be in the position "0" as well as
the mains cable unplugged!
On completion of the cleaning work, the
proper operating condition of the device must
be restored: Insert burner pot correctly, close
furnace door.
8.1 Cleaning the top surface
Dirt on the top surface of the stove can be
cleaned with water or if necessary with a mild
soap solution. You are advised against using
aggressive cleaning agents or solvents, since
these can lead to damage to the top surface.
8.2 Cleaning the glass panel
To clean the inspection panel, first the furnace
door must be opened. Impurities on the glass
panel can be removed with a glass cleaner or with
a moist sponge, on which you put available wood
ash (environmentally friendly).
The cleaning of the glass panel may only be
carried out with the stove cooled down and in the
operating state OFF.
8.3 Cleaning the burner pot
During operation, deposits can form in the burner
pot. How fast the burner pot becomes soiled is
dependent solely on the quality of the fuel. The
deposits or incrustations must be removed from
time to time.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info