812037
15
Zoom out
Zoom in
Previous page
1/40
Next page
15
7.3. Selection of operating mode
The controller enables a simple selection of the
modes „Heating“ and „Auto“ (weekly program).
7.3.1 Mode „Heating“
The keys on the control unit are described in
chapter 6.
In this mode, the operator can set the required
target room temperature (between 10°C and
30°C) using the four control keys on the control
unit.
In each case, the stove warms the room to the
required target room temperature and on reaching
this and running through the cooling program,
switches to the operating state „Standby“.
While the stove is operated in this mode, the
room is heated again and again to the set target
room temperature, day and night, i.e. during this
mode, with regard to the required room
temperature no differentiation is made between
day and night or other periods.
7.3.2 Setting the target room temperature in
mode „Heating“
Continue to press the left key until the information
page appears.
Then press the lower middle key
Now the programming window is opened, in
which the required target room temperature is set.
The explanation of the keys or their functions is
indicated in the bottom row in this programming
window.
With the middle up key, the required target room
temperature is increased in „1°C steps“. With the
middle down key, the required target room
temperature is decreased in „1°C steps“.
With the left key, the programming window is
closed, without a new target room temperature
being saved.
With the right key, this programming window is
closed and the new input target room temperature
is saved.
7.3.3 Mode „Auto“ (Weekly program)
In this mode the operator can freely select three
ON- and OFF times per day (per 24 hours) for
each of the seven weekdays, in each case with
the associated target room temperatures
(between 10°C and 30°C) required by the
operator.
7.3.3.1 Setting date and time
Before operation with the weekly program, the
date and time is to be set.
Method:
¾ Continue to press the left key until the
information page appears
¾ In the information page, press the right
key (menu)
¾ The main menu now appears
¾ In the main menu, with the two middle
keys position the cursor on Date / Time
¾ Press right key (select)
¾ Now the programming window for date
and time appears
¾ In the programming window, press the
right key (change)
¾ Now the programming is activated – with
the right key (arrow) select the field to be
changed
¾ With the two middle keys (+ / -) perform
the change
¾ Run through the programming window
with the right key (arrow) until the function
„Save“ appears in the bottom text row
¾ Press right key (Save) – the change is
saved
¾ Press left key (back) – main menu
appears
7.3.3.2 Mode „Auto“ (Weekly program)
With this mode, the programming must be
performed for each weekday.
The stove heats the room to the respective
required target room temperature and on reaching
this and running through the cooling program,
switches to the operating state „Standby“
This mode enables an adaptation of the target
room temperature to the personal heating
requirement.
7.3.3.3 Setting the target room temperature in
mode „Auto“ (weekly program)
Continue to press the left key until the information
page appears.
Then press the lower middle key.
Now the programming window is opened, in
which the weekdays can be selected.
With the two middle keys, the weekday can be
selected in the second row with the cursor (the
selected day is that one which is underlined with
the cursor).
After successful selection with the cursor, press
the right key (change)
Now the programming window for the selected
day appears
In the first column are the position numbers 1, 2
and 3
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info