665744
17
Zoom out
Zoom in
Previous page
1/71
Next page
17
MULTIPEARL 200.2 / 200.4 XL / 201.4
EN
• Downslope adjustment Use the lower knob.
• Post gas adjustment Keep button 3 pushed and at the same
time use the upper knob to adjust the
Post Gas.
+
TIG EASY (VALVE TORCH)
• Entering in TIG EASY mode (valve
torch)
Keep button 2 pushed and at the same
time turn the upper knob until "TIG
EASY" is displayed.
+
• Welding current adjustment Use the upper knob.
TIG LIFT WELDING
DC TIG welding requires the use of gas (Argon). Connecting a valve torch will allow to manually adjust the supply of gas and connec-
ting a EURO torch will also offer capability to adjust downslope and post gas settings.
For TIG welding please follow the stages below :
TIG Lift Pro welding with a Euro torch TIG Lift EASY welding with a Valve torch
• See connection page 4.
Connect the gas hose to the back of the machine and to the
gas bottle regulator.
• Adjust the gas ow on the gas bottle regulator.
• To strike an arc touch the piece of metal to weld and press the
torch trigger.
Downslope and Post-gas start automatically once the trigger is
released. They can be adjusted on the device.
• See connection page 4.
• Connect the gas hose from the torch to the gas bottle
regulator.
• Adjust the gas ow on the gas bottle regulator and then open
the torch valve.
• Striking :
Touch the piece of metal to
weld with the electrode
• At the end of the weld :
Lift the electrode to
between 2 to 5 mm from
the metal.
Only stop the gas once the Tungsten electrode has cooled
down.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys MULTIPEARL 200-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys MULTIPEARL 200-2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info