48
INSTALLING THE WT2 MODULE
_____________________________________________
5 Select a menu language by pressing one.
– The remote control display reads: »INSTALLATION PLEASE CHOOSE
POSITION: HORIZONTAL VERTICAL«.
6 Press »HORIZONTAL« or »VERTICAL« to select the future operating mode.
– The remote control display reads: »INSTALLATION SWITCH ON THE
LEFT SPEAKER« (please ignore this message).
7 Press the »RESET« button on the left speaker until the indicator flashes
orange. The display switches to flashing green.
– The left loudspeaker has been detected.
– The remote control display reads: »INSTALLATION SWITCH ON THE
RIGHT SPEAKER« (please ignore this message).
8 Press the »RESET« button on the right speaker until the indicator flashes
orange. The indicators on both speakers switch to green.
– The right loudspeaker has been detected.
– The remote control display reads: »INSTALL SECOND PAIR OF
SPEAKERS?«.
9 To install a second pair of loudspeakers in room 1, press »YES« on the
remote control. Then repeat steps 7 and 8.
or
To end the installation, press »NO« on the remote control.
– The remote control display reads: »INSTALLATION OF LSP IN ROOM
1 COMPLETED«.
– The remote control display then reads: »INSTALL WT2 MODULE?«.
10 To install the WT2 wireless module, press »YES« on the remote control.
– The remote control display reads: »PLEASE REFER TO THE AUDION
MANUAL«.
INSTALLATION
CANCEL
VERTICAL
HORIZONTAL
POSITION:
PLEASE CHOOSE
INSTALLATION
NO
YES
WT2 MODULE?
INSTALL