ENGLISH
49
INSTALLING THE WT2 MODULE
_____________________________________________
11 Press the »INSTALL« button on WT2 until the »INSTALL« indicator on the
WT2 flashes orange.
– The installation of the WT2 starts. When the orange »INSTALL« indicator
on the WT2 switches off, the WT2 is installed on the HiFi.
– The remote control display reads: »INSTALLATION OF WT2 COMPLE-
TED«.
– The HiFi has meanwhile started the automatic station search (ATS).
After the search is complete, the first DAB station found is played.
If there is no DAB module integrated, the first FM station found is played.
Note:
If the pairs of speakers are controlled by the HiFi system, you will not hear
the television sound when you switch on the television.
12 Proceed with the preset settings as described on page 16.
... at a later date, in configuration with Digi 100
televisions, e.g. Lenaro
For the following procedure you must have installed at least one pair of louds-
peakers on the HiFi system. For this reason the description applies to two cases:
1. You are operating the HiFi and are installing the WT2 at a later date.
2. You are installing the WT2 and the HiFi system at the same time, but you are
installing the loudspeakers on the HiFi first.
For the I
2
C connection, the WT2 is installed on the HiFi via the menu on the tele-
vision screen (see the WT2 installation and operating manual). Switch the chan-
nel selection switch from WT2 to channel combination 2.
