Manual Graupner XG-6i (page 17 of 30) (English, German, French)

637243

Zoom out

Zoom in

1/30

13 94001 GM-Racing XG-6i Race Spec Instructions

English

18. RESET FACRORY SETTING (RESET)

All the setting in the system will be reset to the default

values by this reset function. It takes about 30 seconds.

1. Press “ENTER” to see FUNCTION MENU.

2. Use the +/- Keys to select the RESET function and press

ENTER.

3. Press ENTER to reset the XG-6i memory.

4. Press “EXIT” twice to save and return to FUNCTION

MENU, press EXIT again to return to the Main Screen.

17. SOUND

This function can open or close the buzzer sounding.

1. Press “ENTER” to see FUNCTION MENU

2. Use the +/- Keys to select the SOUND function and press ENTER.

3. Use the +/- Keys to select INH or ACT.

4. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to

return to the Main Screen

19. RESET MODEL MEMORY (MODEL RESET)

This function will reset the data of the current model memory to default values.

1. Press “ENTER” to see FUNCTION MENU.

2. Use the +/- Keys to select the M_RES function and press ENTER.

3. Use the +/- Keys to select YES

4. Press ENTER to reset the data

5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to

return to the Main Screen.

94001 GM-Racing XG-6i Race Spec Instructions 06

English

ADJUSTMENT METHOD FOR VTR-CURVE

Select VTR at setup item “M”, Select setup item “R” and make the following adjustments:

Forward side adjustment:

Use the (+) button to adjust the + side when you want to quicken the rise and use the(-)

button to adjust the side when you want to make the rise milder.

Curve switching point adjustment:

When you want to change the curve switching point relative to the

throttle trigger, select the setting item „P“ by ENTER button, and use the (+) and (-) but-

tons to move to the point you want to set.

3. When ending setting, return to the initial screen by pressing the EXIT.

ADJUSTMENT METHOD FOR CUR CURVE

Select CUR at setup item “M”, select setup item “R” and make the following adjustments:

Curve setup:

Select the setting item „1:“ (1st point), by ENTER button and use the (+) and (-) buttons

to set the 1st point.

Set the throttle curve by sequentially setting „2:“ (2nd point)~ „3:“ (3th point).

2. When ending setting, return to the initial screen by pressing the EXIT.

TERMS: M-MODE, R-RATE,BR-BRAKE, VTR-VERTICAL, CUR-CURVES, P-TRIGGER

POS, 1~3-Curves point 1~3.

94001-eng.indd Druckbogen 7 von 10 - Seiten (14, 7)94001-eng.indd Druckbogen 7 von 10 - Seiten (14, 7) 19.01.2009 08:02:4719.01.2009 08:02:47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner XG-6i in the language / languages: English, German, French as an attachment in your email.

The manual is 2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner XG-6i Manual

Product: