Manual Graupner MC 32 HOTT (page 93 of 345) (English)

467111

Zoom out

Zoom in

1/345

Program description - Base setup models | Helicopter models

This info note will appear as a supplement in the

»Model select« menu and in the sub-menus of the

»Copy / Erase« menu item.

Stick mode

“MODE 2” (Throttle at left stick)

“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)

“MODE 1” (Throttle at right stick)

pitch axis

tail rotor

pitch axis

tail rotor

throttle

roll

throttle

tail rotor

throttle throttle

pitch axis

roll

pitch axis

roll

Motor/Pitch

throttle

tail rotor

throttle

roll

pitch axis

tail rotor

Basically there are four different ways to assign the

four helicopter control functions, roll, nick, tail rotor

and throttle/pitch to the two sticks. Just which of these

is used depends on the preferences of the individual

model pilot.

Use the  selection keys of the left or right touch

pad to select the "Stick mode" line. The option ﬁeld

will be framed.

Model name

Stick mode 1

n/a

BASIC SETTING,MODEL

Info

n/a

Module bind

HoTT

SEL

Starlet

1234g/111111

Tap on the SET key. The currently displayed stick

mode will be displayed in inverse video. Now use the

selection keys of the right touch pad to select from

among options 1 through 4.

A simultaneous tap on the  or  keys of the

right touch pad (CLEAR) will reset the display to

stick mode "1".

Another tap on the SET key will again deactivate

option selection so a change to another line can be

affected.

Binding type

Note:

This menu item is only visible as long as no

receiver is bound to the currently active

model memory.

An “unbound” model memory can be changed at any

time from the default preset memory speciﬁc HoTT

transmitter-speciﬁc synchronization, and vice versa.

So If necessary, change the line “Binding Type” and

press the SET button to the right touch pad.

Stick mode 1

n/a

BASIC SETTING,MODEL

Info

n/a

Module bind

HoTT

1234g/111111

SEL BD1 BD2 BD3 BD4

Binding type Model

... And change with the selection keys of the left or

right touch pad, the setting in “global” (or vice versa):

Stick mode 1

n/a

BASIC SETTING,MODEL

Info

n/a

Module bind

HoTT

1234g/111111

SEL BD1 BD2 BD3 BD4

Binding type Global

Note:

• “Global”, ie speciﬁc sender, receiver

bound to respond to the signals of all

model memories “their” station, which is

why ﬁrmware version V1101 for safety reasons, a

model change only after switching off the

receiving system is possible.

• “Model” -speciﬁc bound receivers respond only

to signals of them explicitly allocated memory

model. One, possibly unintentional, operating

on an unallocated model space is not therefore

possible.

• The HoTT synchronization behavior of a copied

or imported model memory depends on several

factors. For details, refer to the appropriate

section.

• The respective HoTT synchronization type of

“bound” model memory can be seen on the

display of the receiver type in the menu “Model

select”:

“Model” -speciﬁc bound receivers are inversely

and “Global”, ie Transmitter far, bound receiver

“normal” displayed.

As an illustration of this, the model memory 01,

02 and 04 with model-speciﬁc and model memory

03 are in the ﬁgure below exempliﬁed with

transmitter-speciﬁc HoTT Syndication:

Ultimate

Starlet

BELL47G

test phase

new to trim

 free

01 Graubele 1234g/080811

00:44hE12

00:33hE08

00:22hE08

01:23hE16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC 32 HOTT Manual

Product: