467111
91
Zoom out
Zoom in
Previous page
1/345
Next page
91
Program description - Base setup models | Winged models
BASIC SETTING,MODEL
SEL SET STO SET
RF transmit on
RF range test 99s
DSC Output PPM10
Thr. CutOff +100%
–125% 8
Notes:
Be sure the throttle servo does not run out
mechanically when the cut-off function is
activated.
A threshold over +100 % is reached by temporarily
increasing the travel for servo 1 in the »Servo
adjustment« menu to over 100 % then, after
storing the threshold, change servo travel back to
the original value.
Power-on warning
BASIC SETTING,MODEL
SET SET
RF range test 99s
DSC Output PPM10
Motor Stop +100%
–125% 8
Thr. CutOff –––
When a switch, a control switch or a logical switch
is assigned in this line as described in the section
"Assigning transmitter controls, switches and control
switches" on page 60, the respective switch or control
position will be polled and an appropriate warning will
be blended into the basic display under some condi-
tions.
In combination with logical switches, almost any
switch setting can be called up for transmitter switch
on.
#01 0:00h
Stoppuhr
Flugzeit
K78
0:00.0
4.1V
0:00.0
00
0
0
00:00h
M
V
!Warning!
Graubele
H-J Sandbrunner
Auto trim
BASIC SETTING,MODEL
SET SET
DSC Output PPM10
Thr. CutOff +100%
–125% 8
Power on warning L1
Auto trim –––
The "Auto trim" option makes it possible to trim a
model quickly and without complications, e. g. in the
context of a first-flight or even after (major) repairs, etc.
Typically such test flights are initially flown with sticks
counter operated until the desired state of flight is
achieved. This generally involves working the trim con-
trols during the flight to "unburden" the sticks.
This is exactly what the "Auto trim" function is for.
After the desired flight attitude has been achieved via
control functions 2 … 4 (aileron, elevator and rudder),
the switch assigned to "Auto trim" ideally one of the
standard-equipment momentary switches in the switch
panels is to be activated ONCE.
At the instant the switch is activated, the stick offsets
from their neutral positions will be determined and
adopted as trim values. However, this does not take
place instantaneously but rather within about 1 second.
During this period after the switch has been activated,
the sticks should be returned to their normal positions.
Important notes:
Use safety reasons by no means the “Auto
Trim” in default of “0” trim steps in the
same column of the menu “Stick mode”
(page 114).
Be sure that during the switch assignment,
the sticks for aileron, elevator and rudder
are in their neutral positions as otherwise
their offsets from neutral will be adopted right
away in trim memory as the trim value.
Since EVERY activation of the Auto trim
switch has a cumulative effect, after
concluding an "auto trim" ight, the
assigned auto trim switch should be deactivated
for reasons of safety. Otherwise there is a residual
danger that the "Auto trim" function could be
activated accidentally.
Never send a “normal” toggle the Auto-
trim function to or watch out embarrass-
ing that this is provided immediately after
triggering an auto-trimming process again to
“OFF”! OTHERWISE PRESS ANY SWITCH
WILL SOLVE ANOTHER AUTOTRIM OPERA-
TION.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info