747993
29
Zoom out
Zoom in
Previous page
1/80
Next page
29 / 80
33028_mc_28_Teil2_jh
Sticks setting
In this menu you can set the step value of the trim and the control
speed. These settings are valid for the channels one to four. The
channels are listed with their function in the first column, according
to the chosen model type.
Column "Tr"
In this column you can choose if the function has to act globally (GL)
or according to the phase (PH). Not for "CH1". In the main display
,the related setting will be displayed with a shadow on the trim col-
umns.
Shadow = global
No shadow = according to the phase
Column "St"
Here you can set the step "width" of the trim (0 to 10)
The setting always acts globally, max ±30% of the servo travel.
Column "- time +"
This column "Time" sets the movement speed for each movement
direction of the control sticks 1 to 4, individually. The setting always
acts globally.
Symmetrical setting of time:
Move the related control stick into a position in which both sides of
the time adjustment are surrounded by the marking frame.
Asymmetrical setting of time:
Move the related control stick into a position in which each single
side of the time adjustment is surrounded by the marking frame.
Controls setting
In this menu it is possible to assign the controls of the transmitter to
the channels. Only possible for channels 5 to 16; channels 1 to 4 are
preassigned to the control sticks.
The other channels will be visible if you scroll down with the selec-
tion buttons.
The transmitter is supplied with switches, buttons and rotary con-
trols that act separately on each channel.
If you scroll to the right with the selection buttons, other columns
will be visible.
Servo adjustment
Dual Rate / Expo
Stick mode
Channel 1 curve
Switch display
Control adjust
Ch.1
Aile
Elev
Tr +
time
4
4
4
0.0s
0.0s
0.0s
40.0s
Rudd
0.0s
0.0s
0.0s
0.0s
GL
PH
PH
PH
St
Servo adjustment
Dual Rate / Expo
Stick mode
Channel 1 curve
Switch display
Control adjust
In5
offset
0%
0%
0%
–––
0%
In6
In7
In8–––
–––
–––
GL
GL
GL
GL
typ
normal
fr
fr
fr
fr
SEL
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info