747934
12
Zoom out
Zoom in
Previous page
1/36
Next page
12 / 36
S1035_Falcon_12_jh_V1
Programming a fixed-wing model
Free mixers
Note
If you wish to use the gyros, you must always set the tail type to
‘normal’ in the transmiers model type menu.
If your model is a delta, features a V-tail, or has two elevator servos,
you must use the receiver mixer - not the transmier mixer - to con-
trol these control surfaces, since the gyro stabilizaon system will
have no eect on these servos otherwise.
The four receiver mixers work ‘downstream’ of the gyros.
If you have already programmed mixer funcons in the “Wing mix-
ers” or “Free mixers” menu of your HoTT transmier, you must
ensure that those mixers do not overlap with those available in this
menu!
Mixer
Up to four mixers can be contemporaneously programmed . You can
switch between Mixer 1, Mixer 2, … and mixer 4 in the “Mixer” line.
The following sengs only aect the mixer selected in this line.
From channel
The signal source (or source channel) is mixed in to the target chan-
nel (TO CHANNEL) with a programmable amount. The method of
seng up the values is analogous to the “Free mixers” menu in HoTT
transmiers.
To channel
TO CHANNEL: part of the source channel signal (FROM CHANNEL) is
mixed into the target channel (TO CHANNEL). The mixer rao is
determined by the percentage values entered in the TRAVEL-” and
TRAVEL+” lines. Select "0" if you do not want to acvate any mixer.
Mixer rao (TRAVEL-/+): in these two lines you can define the mixer
rao in relaon to the source channel (FROM CHANNEL); the value
is set separately for both direcons.
Programming examples
V-tail with rudder dierenal
Dierenal is not normally necessary with this tail type. Mixer 3 is
not required if you do not need rudder dierenal, and TRAVEL for
mixer 2 must then be set to -100%.
Alternavely you may prefer to carry out the programming using the
transmier menu.
   
 
  
  
 
   
   
   
 
  
  
 
   
   
   
 
  
  
 
   
   
   
 
  
  
 
   
   
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner FALCON 12 - S1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner FALCON 12 - S1035 in the language / languages: English as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner FALCON 12 - S1035

Graupner FALCON 12 - S1035 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info