747934
14
Zoom out
Zoom in
Previous page
1/36
Next page
14 / 36
S1035_Falcon_12_jh_V1
Gyro assignment
Aileron servos:
You should enter the value 2 in this line if your model has two aile-
ron servos. In this case the gyro for channel (servo) 2 also acts on
servo 5. If the ailerons are also used as flaperons or speedbrakes,
gyro suppression is based on the sum of both channels.
Note
The servo reverse seng must be the same for both aileron servos,
i.e. either both ‘normal’ or both ‘reverse’. If this is not possible, on
no account should you reverse one servo in the transmier menu.
The only opon is to re-install it in the model by turning it round
physically.
However, if your model is fied with programmable servos (e.g.
Graupner DES, HVS or HBS types - see the instrucons for the update
program ‘Firmware_Upgrade_grStudio - then it is possible to
reverse the direcon of ro
taon at the servo itself.
Please read the installaon notes on page 8 of these instrucons.
The rst step is to define the three gyro axes and the orientaon of
the receiver. This is accomplished by switching on the transmier
and model, and selecng ‘DO SETUP: yes’ in the receivers ‘Gyro set-
ngs’ menu.
Now move the sck for any control surface to full travel (in the
servo display at least 25%) in the indicated direcon; in the fol-
lowing example we use the aileron channel.
The detected axis (aileron) is highlighted (black background). (In
the receivers default state the value for all axes is shown as ‘+0’;
the axes can also be set manually to ‘+0’. 0 = inacve)
Now turn the model through at least 45° in the direcon corre-
sponding to the sck movement. For example, if you moved the
aileron sck to the le, you must simulate a le turn with the
model -> move the le wing down through at least 45°.
This process defines the one axis and direcon; now you must
repeat the procedure for the other two axes.
The gyro axis 1, 2 or 3 is now displayed in the ‘Aileron / Elevator
/ Rudder’ display; a negave prefix will appear if servo reverse is
acvated.
Once all three axes are defined, the display automacally reverts
to ‘New seng: no.
   
  
  
  
 
 
   
  
  
  
 
 
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner FALCON 12 - S1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner FALCON 12 - S1035 in the language / languages: English as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner FALCON 12 - S1035

Graupner FALCON 12 - S1035 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info