747934
10
Zoom out
Zoom in
Previous page
1/36
Next page
10 / 36
S1035_Falcon_12_jh_V1
Power supply
The receiver does not feature specific sockets for connecng the
baery. We recommend that you connect the power supply to the
socket(s) close to the servos already connected to the receiver. If you
wish to connect mulple separate baeries, the baeries must be
of the same nominal voltage and capacity. Never connect dierent
baery types or baeries with strongly dierent charges since this
can cause an eect similar to a short circuit. In such cases for safety
reasons, insert voltage stabilizing elements such as PRX-5A (No.
4136) receiver power supplies between the baeries and receiver.
Programming the receiver sengs
The receiver can be programmed with a suitable HoTT transmier
or in connecon with the SMART-BOX.
Receiver sengs menu
The receiver setup menu appears in the Telemetrymenu under
SETTINGS / DISPLAYS or if you are using a SMART-BOX under SET-
TING & DATAVIEW. How to access this menu is described in the oper-
ang instrucons supplied with your transmier or Smart-Box.
Model type
Seng "HELI" or "Fixed-wing". The following specific seng menus
will appear depending on the model type selected. Factory reset for
heli sengs: Switch from heli to xed-wing then disconnect the
power supply and reconnect it.
Then switch from xed-wing to heli, disconnect the power supply
and reconnect it.
Low voltage warning (ALARM VOLT)
If the receiver voltage or the external voltage at channel 5 falls below
the set value, a low-voltage warning is generated by the transmit-
ter's RF module in the form of a "general alarm tone" (regular beep-
ing at a rate of approx. one beep per second) or the "r
eceiver volt-
age" speech output message.
Temperature warning (ALARM TEMP)
If the receiver temperature exceeds the set temperature, a warning
is generated by the transmiers RF module in the form of a "general
alarm tone" (regular beeping at a rate of approx. one beep per sec-
ond) or the "receiver temperature" speech output message.
  
 
  
  
  °
 
   
 
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner FALCON 12 - S1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner FALCON 12 - S1035 in the language / languages: English as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner FALCON 12 - S1035

Graupner FALCON 12 - S1035 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info