747934
11
Zoom out
Zoom in
Previous page
1/36
Next page
11 / 36
S1035_Falcon_12_jh_V1
Cycle me (CYCLE)
If your system is used exclusively with digital servos, you can set a
cycle me (frame rate) of 10 ms. If your system includes some or
uses exclusively analogue servos, you should always select 20 ms, as
many analogue servos cannot process the higher frame rate and
may respond by "jiering" or "growling".
SUMD (Sum signal) at channel 5
If you acvate the digital sum signal at channel 5, a sum signal con-
taining 8 channels is present at this socket, instead of a servo signal.
The HoTT receiver configured as SUMD constantly generates a digi-
tal sum signal from 8 control signals from the transmier and makes
this signal available at the specified servo socket, which is receiv-
er-specific. This type of signal was being used by some of the newest
flybarless systems and power supplies.
Channel 5 (C5)
This socket allows you to use either for telemetry "Sensor" or for an
extra channel servo 5 "Servo" or or for measuring the voltage "Volt-
age".
Aenon! It is only possible one funcon at the same me!
Only through the unit described in the introducon it is possible to
measure a voltage up to max. 25.5 V DC. This voltage will be shown
in the display of the transmier instead the receiver voltage. This
way it is possible to monitor the main baery voltage without using
external sensors.
Note
If the voltage measurement is acve, the following described switch
(see sketch) must be used to measure a maximal voltage of 25.5 V
through this output. Never connect a baery to this telemetry port
without this switch!
This voltage distribu
tor is included in the ESCs S3082 and S3083.
<- Channel 9
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner FALCON 12 - S1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner FALCON 12 - S1035 in the language / languages: English as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner FALCON 12 - S1035

Graupner FALCON 12 - S1035 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info