703120
24
Zoom out
Zoom in
Previous page
1/56
Next page
EN 26
6. Start the steaming process by turning the steam power control approx. a quarter turn.
The device starts to emit steam, and any existing condensation is drained away.
7. As soon as steam emerges continuously from the steam nozzle, direct the steam
nozzle into the frothing container and immerse it in the milk.
8. Turn the steam power control further to the left to remove more steam.
9. First hold the steam nozzle just below the surface of the milk to warm it up. Once the
milk is warm to the touch, hold the steam nozzle at the bottom of the frothing con-
tainer so that the milk is swirled around.
10. Once the milk froth is of the desired consistency, turn the steam power control all the
way to the right and pull the frothing container down and outwards.
After switching off the production of steam, the device drains off excess water.
Therefore direct the steam nozzle back towards the drip tray or into an empty
vessel.
11. Tap the frothing container one to two times on a solid surface to compress the milk
froth.
12. Pour the milk froth into the drinking vessel or scoop it with a spoon.
13. If no more steam is required, press the
steam button. The water in the device
cools back down to around 90 100°C.
PLEASE NOTE: Before preparing espresso again, make sure that the water is once
again at the correct temperature and the steam control lamp is no longer lit up, as
otherwise the espresso powder will burn during the brewing process and too many
bitter compounds will be released.
14. After use, press the On / Off switch to switch off the device. The operating lamp
goes out.
If the device is not switched off manually, it automatically switches off after 30
minutes in stand-by mode.
Care and Storage
PLEASE NOTE!
Allow the device and accessories to cool down before they are cleaned.
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These can damage the surface.
1. Take the porta lter (8) out of the device and empty it (see the “Handling and Opera-
tion” chapter “Removing the Porta lter from the Device” and “Emptying the Porta-
lter”).
2. Remove the sieve insert (14) (see the “Handling and Operation” chapter “Inserting
/ Removing the Sieve Insert”).
3. Empty the drip tray (6) after each use (see the “Handling and Operation” chap-
ter “Inserting / Removing the Drip Tray”).
4. Clean all used accessories with mild detergent and warm water.
5. Wipe down the housing with a damp cloth. If necessary, use a little mild detergent to
remove more intense soiling.
6. Check the mains connecting cable regularly for any damage.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx CM5013B-GS - 02843 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx CM5013B-GS - 02843 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info