590655
15
Zoom out
Zoom in
Previous page
1/68
Next page
GMC-I Messtechnik GmbH 15
3 Initial Start-Up
The MERISO PRIME+ test instrument is supplied with a base
which serves as a compartment for storing test cables, the guard
cable (feature G1), the test probes and the battery pack
(feature C1).
Attention!
!
The test instrument may only be operated if the
base is properly attached and secured.
3.1 Battery Operation, Feature C1 (not with B1/B2)
The battery pack is required for operation of the MERISO
PRIME+ without mains power. The battery back includes 8 NiMH
batteries. No other battery packs may be used.
The battery pack is charged automatically by the integrated mains
power pack. Optional use of an automotive charging adapter is
also possible. The device must be switched on in this case (any
switch position other than OFF).
Attention!
!
If only the batteries are to be charged (instrument is
ready for operation in SETUP position), please ensure
that the test instrument cannot be used by unauthorized
personnel during the charging process.
3.1.1 Removing the Device Base and Inserting or Replacing
the Battery Pack
Please observe instructions included in this chapter if the device
is to be retrofitted with a battery pack, or if the battery pack
requires replacement.
Attention!
!
Before dismantling the device base:
– Disconnect the device from the measuring circuit at all
poles.
– Disconnect the device from mains power.
– Turn the device off (set the switch to OFF).
Ð Close the cover and position the handle at the side of the de-
vice.
Ð Turn the device upside down, i.e. place it onto its cover.
Ð Unwind the test cables from the cable uptake at the side.
Ð Remove the guard cable from the device base if one is in-
cluded (feature G1).
Ð Loosen the three Phillips head screws at the bottom of the de-
vice base.
Ð Lift the device base up, and set it down at the side of the de-
vice with the feet at the bottom.
Ð Place the battery pack onto the two rubber cushions in the re-
cess in the device base such that the connector cable with
plug connector from the battery pack is on the same side as
the device’s connector cable with socket connector.
Double-check: The opening at the side of the base coincides
with the device’s connection panel.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO PRIME plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO PRIME plus in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRISO PRIME plus

Gossen Metrawatt METRISO PRIME plus User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info