590655

Gossen Metrawatt METRISO PRIME plus Manual

14
Zoom out
Zoom in
Previous page
1/68
Next page
14 GMC-I Messtechnik GmbH
Attention!
!
The vent slots in the bottom of the high-voltage module
may not be covered!
Attention!
!
Observe the Rules for Electrical Testing Equipment issued by
the G
ERMAN TRADE ASSOCIATION FOR PRECISION ENGINEER-
ING AND ELECTRICAL ENGINEERING (see enclosed bro-
chure).
Attention!
!
Observe DIN VDE 0104 regulations:
“Setup and Operation of Electrical Test Equipment”
Attention!
!
If safety test probes are used, the operator must inspect
them to assure that the test probes and their cables are
in flawless condition before placing them into service.
All equipment must be inspected for visible, external
damage before use (see chapter 10.3 on page 61
through chapter 10.5 on page 62).
Attention!
!
Before initializing any tests, and before enabling test equip-
ment, make sure that all means of access to the danger
zone are closed, and that all persons have exited the
danger zone.
Attention High-Voltage!
When the trigger at the high-voltage switching pistol is
pulled to the first point of discernible mechanical resis-
tance, the test probe is exposed.
If the trigger is pulled beyond this point of mechanical re-
sistance, high-voltage is applied to the test probe, as-
suming the high-voltage module is in the “standby”
mode.
Attention High-Voltage!
Touch neither the test probe nor the device under test
during the high-voltage test!
Life endangering high-voltage of up to 5.35 kV is present at
the test probes of the high-voltage module!
Limitation of Liability
PCs located in proximity to the test equipment may “crash” in the
event of arc-over, resulting in possible data loss. All data and pro-
grams should be suitably saved, and computers shut down
before performing the high-voltage test. PCs may crash even if no
RS 232 connection has been established.
The manufacturer of the test instrument assumes no liability for
direct or consequential damages to computers or peripheral
devices, or for data loss during performance of the high-voltage
test.
Furthermore, the manufacturer assumes no liability for defects at
devices under test resulting from the high-voltage test. This
applies in particular to electronic components included in the
device under test.
Observe checklist for performance of high-voltage tests in chapter 2.1.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO PRIME plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO PRIME plus in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRISO PRIME plus

Gossen Metrawatt METRISO PRIME plus User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info